Multitech Multi-Tech FaxFinder FF120 Administrator User Manual page 184

CAUSE A: During transmission, the name server's address could not be resolved (that is, the FaxFinder
unit could not contact your name server).
RESPONSE A: Contact the FaxFinder unit using telnet and try to ping the name server.
telnet 192.168.x.x
user: admin
password: admin
# ping 192.168.y.y (where this is the address of the name server)
If the name server ping fails, you must determine why it failed.
The name server may not be reachable because it is on a different subnet. The name
server ping could also fail because the default gateway has been set incorrectly.
If the name server ping succeeds, then try to ping the mail server using its domain
name.
# ping mail.ourcompany.com
If you succeed in pinging the mail server by its IP address but yet it cannot be pinged
via its domain name, then the name server is not functioning correctly.
If the mail server can be pinged neither by its domain name nor by its IP address, then
consider item B below.
CAUSE B: The mail server is not running or cannot be contacted from the FaxFinder unit.
RESPONSE B: Verify that the mail server is running by sending an email to yourself using your
email software.
If you cannot send an email to yourself using your email software, then the mail server is
not running and you should find out why.
If you can send an email to yourself using the email software, then there is a problem
between your mail server and the FaxFinder unit. Call Multi-Tech Tech Support (1-800-
972-2439).
CAUSE C: The client PC running the mail software cannot connect to the mail server.
RESPONSE C: If you, as a client, cannot send yourself an email, then contact your
administrator; there may be a problem with your mail server.
CAUSE D: The administrator's email address may be missing or incorrect.
RESPONSE D: Check and add/correct the administrator's email address, as needed.
Multi-Tech Systems, Inc. FaxFinder Admin User Guide
Appendix A: Troubleshooting
184