Part B: Connecting to Telephony Service
The FaxFinder can either be connected to a PBX
(for use in Automated Routing Mode ) or to POTS lines
(for use in Manual Routing Mode ).
Connection for
Automated Routing Mode
Plug one end of the phone cable into the
FaxFinder's LINE jack and the other into an
available Station Port on the PBX.
An RJ11-to-RJ11 cable is included with your
FaxFinder.
Automated Routing Mode
1
2
3
Multi-Tech Systems, Inc.
4
5
6
7
8
ETHERNET
COMMAND
FaxFinder Admin User Guide
Connection for
Manual Routing Mode
Plug one end of the phone cable into the
FaxFinder's LINE jack and the other end into
your standard telephone receptacle.
LINE 2
LAN 1
CONSOLE
LINE 1
Chapter 2: Installation
Manual
Routing
Mode
RESET
16