Manual Station Preset - Yamaha R-S700 Owner's Manual

3
Press OPTION on the remote control.
The Option menu for TUNER is displayed (see page
32).
4
Press B / C on the remote control to select
"Auto Preset", and then press ENTER.
This unit starts scanning the FM band about
5 seconds later from the lowest frequency upwards.
y
• Before scanning begins, you can specify the first preset number
to be used by pressing PRESET j / i on the front panel (or
PRESET F/G or B/C on the remote control).
• To cancel scanning, press FM or AM on the front panel (or FM
or AM or RETURN on the remote control).
Preset number
When presets are registered, information is displayed
on the front panel display as shown in the illustration
above.
When scanning is complete, "FINISH" is displayed
and then the display returns to the Option menu.
To return the display to the original state, press
OPTION or RETURN on the remote control.
Frequency

Manual station preset

You can manually register up to 40 FM/AM stations (40
total). You can then easily recall any preset station by
selecting its preset number.
y
When stations are registered manually, the FM Mode setting
(mono or stereo) at the time of registration is also registered.
Confirm the FM Mode setting (see page 19) before registering
stations manually.
MEMORY
RETURN
FM/AM TUNING
PRESET j / i
PRESET F / G
Numeric
buttons
21
En