Table of Contents
Advertisement
Troubleshooting
Symptom
Possible Cause
Erratic
Unit not receiving
behavior.
enough power under
self-powered operation.
Pressing the
The connection from
Hotkeys gets
the selected port to the
no response.
target computer has
been broken, or the
computer is turned OFF.
Improper keyboard
reset.
Improper Master View
reset.
Incorrectly keying in
the Port ID.
Mouse is not
Improper mouse reset. 1. Reset the mouse (and keyboard) by
responding.
CS-88A User Manual
Action
Use the Power Adapter that was supplied with
the unit to provide
Check the Online LED for the selected port. If it
is not lit:
1. Manually press one of the Select switches to
connect to a computer that is powered ON.
2. Check the cables to make sure they are all
properly connected.
1. Reset the keyboard (and mouse) by
simultaneously pressing Buttons 1 and 2 on
the First Stage unit for 3 seconds.
2. Unplug the keyboard connector from the
Console Keyboard Port, then plug it back in.
Turn off all Master View units and wait five
seconds before turning them back on. See
Powering Off and Restarting, p. 12, for details.
After invoking the Hotkey function with the
[Numlock /] combination, be sure to key in the
Port ID and press [Enter] within one second for
each key.
simultaneously pressing Buttons 1 and 2 on
the First Stage unit for 3 seconds.
2. Unplug the mouse connector from the
Console Mouse Port, then plug it back in.
2002-12-27
35
Advertisement
Table of Contents
