Download Print this page
MTD CUB CADET 24AD598A010 Consumer Inspection Procedures
MTD CUB CADET 24AD598A010 Consumer Inspection Procedures

MTD CUB CADET 24AD598A010 Consumer Inspection Procedures

Log splitters - “energy” control valve (8, 21, 25, 27 and 33 ton capacity)

Advertisement

Read and understand these instructions thoroughly before proceeding.
1. Locate the model and serial number for your log splitter on the model label. See Figure 1.
Model Label
2. Is the model number of your unit one of the model numbers in the table below? If yes, then proceed to Step 3. If no,
your log splitter is not affected by this recall and you should stop here.
CUB CADET
24AD598A010
24BF550M006
24BF572B710
24BF572B756
3. Use the serial number to determine the date on which your unit was built. See the Understanding the Serial No.
Date Code box below.
Within the 11 digit serial number, the second through the fifth digits define the build date of the log splitter.
For example, "H 24 9" in the serial number below indicates the unit was built on "August 24, 2009".
.
4. Was your unit built between...
November 1, 2008 (Date Code "...K018...") and September 1, 2009 (Date Code "...I019...")?
If yes, then proceed to Step 5. If no, your log splitter is not affected by this recall and you should stop here.
Consumer Inspection Procedures
For Log Splitters - "Energy" Control Valve
(8, 21, 25, 27 and 33 Ton Capacity)
INSPECTION PROCEDURE
MTD
MTD GOLD
24BF510B004
24BF510E204
24BF570F204
24BF570L004
UNDERSTANDING the SERIAL NO. DATE CODE
Logo will vary with
brand of unit
INSPECTION PROCEDURE
21 to 33 Ton
8 Ton
FIGURE 1
SEARS CRAFTSMAN
247.77640 (24BF570L099)
247.77641 (24BF570F299)
Month
A = January
G = July
B = February
H = August
C = March
I = September
D = April
J = October
E = May
K = November
F = June
L = December
Units with build dates between
November 1, 2008 and September 1, 2009 inclusive are affected.
is continued on Page 2
1 of 3
Model Label
TROY-BILT
YARD MACHINES
24AD597D766
24AA5DMK500
24AD597D711
24BF550B029
24BF572B711
24BF552B729
24BF572B766
24BH510B500
1
H 24 9
H46128
8 = 2008
9 = 2009
Day of Month
Form No. 769-05565
Year

Advertisement

loading

Summary of Contents for MTD CUB CADET 24AD598A010

  • Page 1 4. Was your unit built between... November 1, 2008 (Date Code “...K018...”) and September 1, 2009 (Date Code “...I019...”)? If yes, then proceed to Step 5. If no, your log splitter is not affected by this recall and you should stop here. INSPECTION PROCEDURE Consumer Inspection Procedures For Log Splitters - “Energy”...
  • Page 2: Inspection Procedure

    6. If the valve has the name “ENERGY” on the end cap, as shown in Figure 3, the valve must be tested. Proceed to the “TEST PROCEDURE” section on Page 3. If the end cap on the control valve does not have the name “ENERGY” on it, your log splitter is not affected by this recall. You should stop here.
  • Page 3 3. Check the fluid in the hydraulic reservoir to make sure it is at the correct level. 4. Ensure that the log splitter’s wedge (or ram if you are inspecting an 8 Ton Model) has no obstructions in its path.

This manual is also suitable for:

24bf550m006Cub cadet 24bf572b710Cub cadet 24bf572b756Gold 24bf510b004Gold 24bf510e204Gold 24bf570f204 ... Show all