Reset And Self-Check Procedure; Driver Setup Adjustment - Panasonic TH-37PX60U Technical Manual

Reset and Self-check Procedure

CHASSIS: GP9D and GPH9D
All models
How to access the self-check
screen to reset the unit.
Select a television channel, and while
pressing the [VOLUME ( - )] button on
the main unit, press the [OK] button on
the remote control for more than 3
seconds.
How to Exit the self-check
screen
Disconnect the AC cord from the wall
outlet.
All parameters of the unit are now set
to factory default.
TH-42PD60U Driver Setup Adjustment
Item / Preparation
1. Input a white signal to plasma video input.
2. Set the picture controls as follows.
Picture menu: Vivid
Picture: +30
Aspect: Full
Caution
1. First perform Vsus adjustment.
2. The Confirmation of Vscn voltage should be performed
after the confirmation of Vad adjustment.
When Vad=-90V, Voltage of Vscn is 30V ±3V.
Initialization Pulse Adjust
1. Input the White signal to plasma video
input.
2. Set the picture controls as follows.
Picture menu : Vivid
Picture : +25
Aspect : Full
3. Connect Oscilloscope to TPSC1 (T2)
and adjust VR6602 for 195+10 Sec.
Test point Volume
T2 TPSC1 (SC) VR6602 (SC
57
Level
170 ± 10 Sec
58
Self-check Screen
Driver Setup Table
Panel Label
Adjustment
Voltage