Special Features
Interference Eliminator Code
Interference Eliminator Codes help minimize interference by providing you with a
choice of code combinations.
To set the code for a channel:
1. Press
until the code starts to flash.
\
2. Press
or
]
[
3. Press
to save the code setting.
M
You can set a different code for each channel using this procedure.
Note: You must set the Interference Eliminator Code to
uses Interference Eliminator Codes to communicate with other FRS radios that
do not have Interference Eliminator Codes.
Push to Talk Timeout Timer
To prevent accidental transmissions and save battery life, the radio emits a
continuous warning tone and stops transmitting if you press
seconds.
to select the code.
on an FRS radio that
0
for 60 continuous
M
21