Table of Contents
Advertisement
Channel
1. With radio On, press
2. Use
and
to change Channel while flashing.
[
]
3. Press
to set new Channel.
M
Interference Eliminator Code (T5410 or T5420)
The interference eliminator codes help minimize interference by
providing you with a choice of code combinations.
•
To set the code, press
•
Then press
[
•
Press
to save the code setting.
M
You must set the Interference Eliminator Code to
communicate with a T5320.
You can specify a different code for each channel. To set a channel and code
combination, press
and then press
[
channel and code combination. To set another channel and code combination,
repeat these steps.
Volume
Rotate
while holding down
P
a comfortable listening level. Rotate
to decrease volume.
, Current Channel will begin to flash.
\
until the code display begins to blink.
\
or
to set the code.
]
and then press
\
[
or
to select a code. Press
]
(T5410) or
J
P
on a T5410 or T5420 to
0
or
to select the channel. Press
]
to exit the menu and to save the
M
(T5320 and T5420) until you reach
Q
clockwise to increase and counterclockwise
again
\
15
Hide quick links:
Advertisement
Table of Contents
