Scan Advance
If the radio stops scanning on a channel you do not want to listen to, briefly press
and release
or
to resume scanning for the next active channel.
]
[
Removing Channels from the Scan List (Nuisance Delete Feature)
To remove a channel so the radio does not stop on it while scanning, press and
hold
or
for at least 3 seconds, then release. This temporarily removes the
]
[
channel from the scan list.
To restore the channel, turn the radio off and then back on.
Note: You cannot remove the channel your radio was set to when you started
the scan (called your home channel).
23