Table of Contents
Advertisement
Keypad Lock
To avoid accidentally changing radio operation, press
for 3 seconds. Now you will
\
see the
icon. This sequence locks the menu,
and
, and Scan (T5410 Only)
f
[
]
functions. Once locked, you will be able to turn the radio Off and On, increase or
decrease Volume, transmit, send a call tone and monitor.
To unlock, press and hold
for 3 seconds.
\
Scan (T5410 Only)
By Scanning, you can monitor Channels and Codes for transmissions and lock in on
the one that interests you. More importantly, you can find someone in your group who
has accidentally changed Channels and is talking during your scan.
To start scanning, briefly press and release the
. If you activate scan while your
J
code is set to
, then the radio will check for activity on each Channel regardless of
0
the Code in use on that Channel. If you activate scan while the Code is set on
to
1
, the radio will check for activity on each Channel, but only for Codes
to
.
38
1
38
Transmissions using Code
are ignored. When the radio detects Channel activity, it
0
stops on that Channel and displays the Code in use.
While the radio is scanning,
will display and scroll through the Channels. When
h
activity is detected on a Channel, the radio will stop scanning and you will hear
whatever transmissions are detected. The radio's display will show the Channel and
Code on which activity was detected.
If you want to respond to the transmission, press the
button within 5 seconds and
M
you can respond. To stop scanning, briefly press and release the
.
J
17
Hide quick links:
Advertisement
Table of Contents
