Motorola RDU2080d User Manual page 100

Motorola two-way radio user guide
Hide thumbs Also See for RDU2080d:
Table of Contents

Advertisement

Programmable Via
RADIO PANEL
Features
Display
VOX
Sensitivity
Yes
Level
VOX, enable/
Yes
disable
(1) To enter Programming Mode, press and hold both PTT and SB1 simultaneously for 3-5 seconds while turning radio ON (LED will start to blink
green). Short press PTT to get to the different programming options. For setting values, press
(2) Using CPS you can prevent this feature to be programmed via front panel radio.
(3) Contact your Motorola Point of purchase for enabling this feature and/or for radio models details.
(4) For Non-Display Models, feature can be enabled for front panel programming by assigning feature to SB1 or SB2. For Display models:
Feature can be enabled to any of the programmable buttons rather than the default ones. For more details refer to Programming Buttons Chart
or CPS Menus.
98
Programmable via
CPS
Non-
Non-
Display
Display
Display
No
Yes
Yes
Yes
Yes
Yes
Default Value
Front panel radio programming available in display
models by pressing PTT or MENU buttons and
OFF
(level 0)
scrolling down/up with
value. Long press PTT to save.
Allows to use 'hands-free' mode connecting
microphone accessories. To enable connect
external accessory and power up radio.
OFF
Note: The VOX sensitivity level default value is set
to OFF in the CPS settings. Before using this
feature, check VOX sensitivity level.
and
Programming Tips
and
buttons to set
buttons.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rdx rdv2080dRdx series

Table of Contents