Scan; Starting Or Stopping Scan; Scanning A Priority Channel; Talkback - Motorola HT750 User Manual

Two-way professional portable radio
Hide thumbs Also See for HT750:
Table of Contents

Advertisement

SCAN

You can monitor multiple channels and receive
any calls that are transmitted on them.
Depending on your radio model, either four or
sixteen different channels can be programmed
into each scan list by the dealer. Your radio will
automatically switch to a scan list channel
when it detects activity on it.
Note: The same channels can be assigned to
different scan lists.

STARTING OR STOPPING SCAN

The LED indicator blinks green during a scan
operation, and stops blinking when the radio
switches to a channel.
To start or stop a scanning, press the
preprogrammed Scan button (see page 5).

Scanning a Priority Channel

You may want to check the activity on one
channel more frequently than others. Your
dealer is able to prioritize channels for you. For
example:
Priority Channel
Scanning Sequence
None specified
Ch1 Ch2 Ch3
Ch4 ...Ch1
Channel 2
Ch2 Ch1 Ch2 Ch3
Ch2 Ch4 Ch2 ...Ch1
Note: Even if there is activity on a non-priority
channel, your radio will automatically
switch to an active priority channel, and
indicate the activity with a short tone.

TALKBACK

While your radio is scanning, Talkback allows you
to participate in a call in progress. You must press
the PTT button to participate in the call;
otherwise, scanning continues to the next
channel.
Scan
19
English

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents