Repeater Or Talkaround Mode; Setting Tight Or Normal Squelch; Setting The Power Level - Motorola HT750 User Manual

Radio Calls
REPEATER OR TALKAROUND
MODE
Talkaround Mode enables you to communicate with
another radio when either:
• the repeater is not operating
–or–
• your radio is out of the repeater's range but
within communicating distance of another
radio.
Press the preprogrammed Repeater/
Talkaround button (see page 5) to toggle
between Repeater Mode and Talkaround
Mode.
SETTING TIGHT OR NORMAL
SQUELCH
Use this feature to filter out nuisance
(unwanted) calls and/or background noise.
However, tightening squelch could cause calls
from remote locations to be filtered out as well.
In this case, normal squelch may be more
desirable.
18
English
Press the preprogrammed Squelch button
(see page 5) to toggle between tight and
normal squelch.

SETTING THE POWER LEVEL

Each channel in your radio has a predefined
transmit power level that can be changed:
• High power allows you to reach a radio that
is farther away.
Low power conserves the battery's charge.
•
Auto power automatically sets the optimal
•
power level based on the strength of the
signal received. If the received signal is
weak, the transmit level will be set to high,
and vice-versa.
Note: Be aware that a message received
from a nearby radio might change
your radio's power level to low. This
may cause radios that are farther
away not to receive your
transmissions.
Press the preprogrammed Power Level button
(see page 5) to toggle between low and high
power.