Time Delay to Low Power Mode
Parameter # 92h
NOTE This parameter only applies when Power Mode is set to Reduced Power.
This parameter sets the time the digital imager scanner remains active after decoding. The digital imager scanner
wakes upon trigger pull or when the host attempts to communicate with the digital imager scanner.
1 Second
(11h)
*
1 Minute
(21h)
15 Minutes
(2Bh)
User Preferences & Miscellaneous Digital Imager Scanner Options
5 Seconds
(15h)
5 Minutes
(25h)
1 Hour
(31h)
4 - 7