Symbol DS6707 Product Reference Manual page 359

Digital imager scanner
Hide thumbs Also See for SYMBOL DS6707:
Table of Contents

Advertisement

Modifier Characters (Continued)
Table B-3
Code Type
Option Value
D 2 of 5
0
Example: A D 2 of 5 bar code 4123, is transmitted as ]S04123
UPC/EAN
0
1
2
3
4
Example: A UPC-A bar code 012345678905 is transmitted as ]E00012345678905
Bookland EAN
0
Example: A Bookland EAN bar code 123456789X is transmitted as ]X0123456789X
ISSN EAN
0
Example: An ISSN EAN bar code 123456789X is transmitted as ]X0123456789X
Code 11
0
1
3
GS1 DataBar
Family
Example: A DataBar-14 bar code 0110012345678902 is transmitted as ]e00110012345678902.
EAN.UCC
Composites
(GS1 DataBar,
0
GS1-128, 2D
portion of UPC
1
composite)
2
3
1
No options specified at this time. Always transmit 0.
Standard packet in full EAN country code format, which is 13 digits for
UPC-A, UPC-E, and EAN-13 (not including supplemental data).
Two-digit supplement data only.
Five-digit supplement data only.
Combined data packet comprising 13 digits from a UPC-A, UPC-E, or
EAN-13 symbol and 2 or 5 digits from a supplemental symbol.
EAN-8 data packet.
No options specified at this time. Always transmit 0.
No options specified at this time. Always transmit 0.
Single check digit
Two check digits
Check characters validated but not transmitted.
No option specified at this time. Always transmit 0. DataBar-14 and
DataBar Limited transmit with an Application Identifier "01".
Note: In GS1-128 emulation mode, GS1 DataBar is transmitted using Code
128 rules (i.e., ]C1).
Native mode transmission.
Note: UPC portion of composite is transmitted using UPC rules.
Standard data packet.
Data packet containing the data following an encoded symbol separator
character.
Data packet containing the data following an escape mechanism character.
The data packet does not support the ECI protocol.
Data packet containing the data following an escape mechanism character.
The data packet supports the ECI protocol.
GS1-128 emulation
Note: UPC portion of composite is transmitted using UPC rules.
Data packet is a GS1-128 symbol (i.e., data is preceded with ]C1).
Programming Reference
Option
B - 5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents