Motorola SURFboard DOCSIS SB6120 User Manual page 32

2 INSTALLATION
5. Type cmd and click OK to open a command prompt window.
6. Type ipconfig and press Enter to display the IP Configuration.
A display similar to the following indicates a normal configuration.
7. If an Autoconfiguration IP Address is displayed, there is an incorrect connection
between the PC and the SB6120, or there are broadband network problems.
Do the following to renew the IP address:
At the command prompt, type ipconfig /renew and press Enter. If a valid IP address
is displayed as shown, Internet access should be available.
24