Motorola SB5100 Series User Manual page 21

Introduction Before You Begin
SB5100 Series Cable Modem User Guide
Installation & Configuration
Setting Up a USB Driver in Windows 98 Second Edition, continued
After all the necessary files are loaded, the window at upper left is displayed
confirming a successful installation.
10
Click Finish. The window at bottom left is displayed.
11
Click Yes to restart your computer.
When you finish setting up the USB driver, you can continue with
Windows 95, Windows 98 SE, or Windows Me"
If you have difficulties setting up the USB driver, perform
Windows 98 Second Edition or Windows Me"
that does not correct your problem, see the Regulatory, Safety, Software License, and
Warranty Information card provided with your SURFboard cable modem for information
about obtaining warranty service.
Troubleshooting FAQ
on page 23.
"Removing the USB Driver from
on page 45 and repeat this procedure. If
Glossary License
"Configuring TCP/IP in
15