Introduction
Before You Begin
Be sure the SURFboard Cable Modem
CD-ROM is inserted in your CD-ROM drive
before you plug in the USB cable.
SB5100 Series Cable Modem User Guide
Installation & Configuration
Setting Up a USB Driver
The following subsections describe setting up a USB driver. Perform the appropriate
procedure for your Windows version:
•
"Setting Up a USB Driver in Windows 98 Second Edition"
•
"Setting Up a USB Driver in Windows 2000"
•
"Setting Up a USB Driver in Windows Me"
•
"Setting Up a USB Driver in Windows XP"
When you finish setting up the USB driver, you can continue with
on page 22.
The SURFboard cable modem USB driver does not support Macintosh or UNIX
computers. For those systems, you can connect through Ethernet only.
Troubleshooting
FAQ
on page 16
on page 20
on page 21
Glossary
License
on page 12
"Configuring TCP/IP"
11