Configuring Tcp/Ip For Windows 7; Configuring Tcp/Ip In Windows Vista - Motorola SURFboard SB6180 Installation Manual

''Configuring TCP/IP for Windows 7

1. Click Start and then click Control Panel.
2. Click Network and Internet to display the Network and Internet window.
3. Click Network and Sharing Center to display the Network and Sharing Center
window.
4. Click Change adapter settings to display the LAN or High-Speed Internet
connections window.
5. Right-click the network connection for your network interface.
6. Select Properties to display the Local Area Connection Properties window.
7. Select Internet Protocol Version 4 or 6 (TCP/IPv4 or v6) and click Properties to display
the Internet Protocol Properties window.
8. Select Obtain an IP address automatically and Obtain DNS server address
automatically.
9. Click OK to save the TCP/IP settings and close the Internet Protocol Version 4
(TCP/IPv4) Properties window.
10. Click Close to close the Local Area Connection Properties window.
11. Close the remaining windows and exit the Control Panel.
When you complete the TCP/IP configuration, go to
7.

Configuring TCP/IP in Windows Vista

1. Click Start.
2. Right click on Network.
3. Scroll down to Properties.
4. Click Manage network connections.
5. Right-click on the appropriate (if more than one listing) Local Area Connection.
6. Click Properties. Vista may prompt you for permission to continue – Click Continue.
7. Select Internet Protocol Version4 (TCP/IPv4) and click Properties.
8. Verify that the Obtain an IP address automatically and Obtain DNS server
address automatically options are selected.
9. Click Advanced. Use the table below to verify the Advanced TCP/IP Settings.
SURFboard SB6180 DOCSIS 3.0 Cable Modem • Installation Guide
570878-001-b
Verifying the IP Address in Windows
B
4