Shure UNISPHERE PE585V User Manual

MODEL PE585V
UNISPHEREE A
Your selection of a Shure U N I S P H E R E ~ Microphone will
contribute significantly to the professional quality of your
performance. This rugged unidirectional microphone effec-
tively controls feedback (that very annoying loudspeaker
"squeal") because it picks up sound only from the front
of the microphone. Unwanted audience noise or other
noises occurring at the rear of the microphone are elim-
inated or suppressed. This allows you to work at signif-
icantly greater distances from your microphone than with
non-directional (omnidirectional) microphones, without
picking up objectionable background sound or feedback.
The built-in volume control on the microphone permits
the user to change the loudness of the P.A. system at the
microphone location. With the control on the microphone
partially turned down (turn knob counterclockwise so that
dot on knob is at 9 o'clock position), the basic overall loud-
ness of the P.A. system can be adjusted by the main volume
control at the amplifier location-then the user can adjust
the volume up or down at the microphone position. Maxi-
mum volume occurs when the dot on the knob is adjacent
to the dot on the microphone (12 o'clock position). In
many instances, minimum setting of the volume control
will reduce volume sufficiently so that the volume control
can be used as an On-Off switch.