Motorola MOTOSTART H350 Quick Start

H350
Bluetooth®
Handsfree Headset
CHARGE YOUR
1
HEADSET
Charge your headset's battery for 2 hours:
1
Plug the Motorola charger into the end of
the headset.
The blue indicator light turns on when the
battery is charging. It may take up to 1
minute for the light to turn on. When the
headset's battery is fully charged (about 2
hours), the blue indicator light turns off.
2
Unplug the charger from the headset.
Note: Headset is not functional while charging.
Get Connected in
4 Quick Steps
1 - CHARGE YOUR
HEADSET
2 - PUT HEADSET
IN PAIR MODE
3 - PAIR PHONE
WITH HEADSET
4 - TEST AND USE
BEFORE YOU
BEGIN
Before using this product, read the Important Safety and
Legal Information pamphlet and follow its instructions.
Take a moment before you get started to
familiarize yourself with your new
H350 Handsfree Headset.
Volume
Buttons
Call
Button
PUT YOUR HEADSET IN
2
PAIRING MODE
Before you can use your headset, you must
pair (link) it with your phone.
Call Button
With the headset power off, press and hold
the Call button for 6 to 10 seconds until the
blue indicator light turns on and remains
steadily lit.
Note: The blue light will flash as you press and hold the Call
button. Continue holding down the Call button until the blue
light is steadily lit.
Note: If you let go of the Call button before the blue light is
on and steady, ensure that your headset is off before trying
again.
Note: To turn off headset, see "Turning Headset On/Off" on
the reverse side of this guide.
Earhook
Blue
Indicator
Light
Microphone
Blue Indicator Light