Scan Line Width; Laser On Time - Motorola Symbol LS1203 Product Reference Manual

4 - 6 Symbol LS1203 Product Reference Guide

Scan Line Width

Scan a bar code below to set the scan line width.
NOTE This feature applies to triggered mode only.
*
Full Width

Laser On Time

This parameter sets the maximum time that decode processing continues during a scan attempt. It is
programmable in 0.1 second increments from 0.5 to 9.9 seconds. The default Laser On Time is 3.0 seconds.
To set a Laser On Time, scan the bar code below. Next, scan two numeric bar codes in
Codes that correspond to the desired on time. Single digit numbers must have a leading zero. For example, to set
an On Time of 0.5 seconds, scan the bar code below, then scan the "0" and "5" bar codes. If an error is made, or
the selection needs to be changed, scan Cancel on
Medium Width
page D-3.
Laser On Time
Appendix D, Numeric Bar