1 - 4
Symbol LS1203 Product Reference Guide
Assembling the Hands Free Stand
Unscrew the wingnut from the bottom of the flexible neck.
1.
Fit the bottom of the neck piece into the opening on the top of the stand base. When positioned correctly, the
2.
flat areas of the neck piece fit into place in the stand base opening.
Tighten the wingnut underneath the base to secure the cup and neck piece to the base.
3.
Bend the neck to the desired position for scanning.
4.
Auto-scan bar code
(under cup)
Flat areas
Stand base
Wingnut
Hands Free Stand Parts
Figure 1-4
Set Auto-scan Mode
To enable hands free scanning, scan the Auto-scan Mode bar code on the back of the cup to set the scanner to
auto-scan mode.
One piece scanner "cup"
with flexible neck.