Table of Contents
Advertisement
Quick Links
RN40743 MUK Rev6:40715 rev3 27/03/2009 14:18 Page 1
'Advanced Finish' iron
Please read and keep these instructions
Getting the best from your new iron....
Safety first
Caution must be used when handling this appliance as it does get
very hot. Always switch off the unit and allow to cool before cleaning
or storing.
Self-clean
Your iron will give the best ironing results and will last longer if you
clean the soleplate once a month, see 'Maintenance' on pages 6 & 7.
!
To improve the life of your new product and to ensure the cleanliness of your
clothes, we strongly recommend the use of distilled or demineralised water.
RN40743 MUK Rev 6
If you have a problem or complaint, please call our dedicated UK based helpline
before returning your product to the retailer from where it was purchased.
UK Helpline: 0844 871 0953
Replacement Parts: 0844 873 0719
Ireland Helpline: 1800 409 119
steam/spray/shot/press
TURBO TIP
CONSTANT
STEAM
PRESS
AND SET
Advertisement
Table of Contents
Related Manuals for Morphy Richards Advanced Finish 40743
Summary of Contents for Morphy Richards Advanced Finish 40743
- Page 1 Self-clean Your iron will give the best ironing results and will last longer if you clean the soleplate once a month, see ‘Maintenance’ on pages 6 & 7. To improve the life of your new product and to ensure the cleanliness of your clothes, we strongly recommend the use of distilled or demineralised water.
-
Page 2: Important Safety Instructions
To avoid the risk of electric shock, do not disassemble the iron, but telephone Morphy Richards for advice. Incorrect reassembly can cause a risk of electric shock when the iron is used. -
Page 3: Electrical Requirements
INSTRUCTIONS FOR USE Temperature guide Heat setting markings on the adjustable control dial of all Morphy Richards irons match those of the International Textile Care Labelling Code. Symbol (120°C Max) Cool... -
Page 4: Before Use
If you turn the control dial down from a hot setting to a cooler setting, wait until the iron temperature has stabilised before you continue ironing. Delicate fabrics such as silk, wool, velour, etc, are best ironed with an ironing cloth to prevent shine marks. -
Page 5: Features Of Your Iron
If you wait a few minutes, the iron will stabilise at the required setting. For details of other Morphy Richards products, please see our website: • Your Morphy Richards iron is fitted with a temperature indicator light ‚... -
Page 6: Vertical Steam
UK Helpline 0844 871 0953 No drip system Your iron is fitted with a no drip system which is designed to prevent water escaping from the soleplate fl when the iron is too cold. - Page 7 Allow the iron to cool and wipe over with a damp cloth and mild detergent, then wipe with a dry cloth. For details of other Morphy Richards products, please see our website: Emptying and storing When you have finished ironing, unplug your iron.
- Page 8 Morphy Richards products are intended for household use only. Morphy Richards has a policy of continuous improvement in product quality and design. The company, therefore, reserves the right to change the specification of its models at any time.