Summary of Contents for Morphy Richards Breeze 40310
Page 1
Always switch off the unit and allow to cool before cleaning or storing. • Jet cleaning (certain models only) Your iron will give the best ironing results and will last longer if you apply jet cleaning after each period of ironing. www.morphyrichards.com...
In addition we offer the following safety advice. Location • Do not use outdoors. • The iron must be used and rested on a stable surface. • When placing the iron on it’s heel, ensure that the surface on which the heel is placed is stable.
Instructions for use Temperature guide Heat setting markings on the adjustable control dial of all Morphy Richards irons match those of the International Textile Care Labelling Code. Symbol Do not iron...
If you wait a few minutes, the iron will stabilise at the required setting. Your Morphy Richards iron is fitted with an indicator light ‚ which will go on and off while you are ironing.
When the required temperature is reached the light will go out and will cycle on-off during operation. Dry ironing You can use your iron as a dry iron only. Make sure the steam control ⁄ is set to the ‘ ’ symbol.
To operate, ensure that there is little water in the tank, place the iron on its heel and turn the temperature control dial to the maximum setting. Wait for the temperature indicator light to go out, then unplug the iron and hold it about 6’’...
Page 7
40310 Rev 2 24/8/07 15:08 Helpline If you have any difficulty with your appliance, do not hesitate to call us. We are more likely able to help than the store from where you bought it. Please have the following information ready to enable our staff to deal with your query quickly.
Page 8
24 months of original purchase, you should contact the Helpline number quoting Model number and Serial number on the product, or write to Morphy Richards at the address shown. You will be asked to return the product (in secure, adequate packaging) to the address below along with a copy of proof of purchase.