Battery Installation And Charging; Battery Installation - AT&T EL52200 User Manual

Getting started

Battery installation and charging

Battery installation

Install the battery as shown below.
1. Plug the battery
connector securely
into the socket inside
the handset battery
compartment, matching
the color-coded label.
CHARGE light
4. Charge the handset by placing it face up in
the telephone base or charger. The CHARGE
light is on when charging.
IMPORTANT INFORMATION:
Use only the supplied rechargeable battery or replacement battery (model BT166342). To order,
visit our website at
1 (866) 288-4268
In Canada, dial
2. Insert the supplied battery
with the label THIS SIDE
UP facing up as indicated.
www.telephones.att.com
To replace the battery, press the tab and
slide the battery compartment cover
downwards. Lift out the old battery and
disconnect it from the handset. Follow the
instructions above to install and charge the
new battery.
, or call
.
5
3. Align the cover flat against
the battery compartment,
then slide it upwards until
it clicks into place.
1 (800) 222-3111
.