Proper Grounding And Installation Tips - Monster Power PRO 7000 Owner's Manual

LIT_PRO7000_manual.qxd 11/10/2003 4:30 PM Page v

PROPER GROUNDING AND INSTALLATION TIPS

CAUTION - Proper Grounding
Monster PowerSource requires a properly grounded 3-wire outlet to protect connected equipment. If your AC outlet
is improperly wired (no ground or reverse polarity), the green "SYSTEM GROUNDED" LED on the front panel
of the Professional Reference PowerSource PRO7000 will not light up.
Many older buildings are inadequately wired. It's very common for a building to be improperly grounded.
Building wiring and grounding must conform to applicable NEC (USA) or CEC (Canada) codes. If you're not sure
about the wiring, have it checked by a qualified electrician.
IMPORTANT NOTE- Proper Power and Protection
To completely deliver clean power and protect your equipment from electrical surges, every phone, coaxial cable,
and AC power cord in your system must be connected to an appropriate Monster PowerSource outlet.
v