Monster Power PRO 7000 Owner's Manual page 26

LIT_PRO7000_manual.qxd 11/10/2003
INDEX DRAWINGS
1. On/Off Button: Press to supply AC power to outlets programmed as SWITCHED ON
or SWITCHED ON AFTER DELAY. Press again to shut these outlets off.
2. Menu Button: Press to begin programming mode.
3. Set Button: Press to set parameters or options selected by the MENU button.
4. Dimmer Button: Dims the alphanumeric display.
5. Grounded OK LED Indicator: Indicates the PowerSource is plugged into a properly grounded 120V AC outlet.
6. Protection ON LED Indicator: Indicates the Monster Power Surge Protection Circuitry is functioning properly.
7. Clean Power LED Indicator: Indicates the PowerSource is on.
8. Abnormal Voltage LED Indicator: Indicates abnormal line voltage. Turn the PRO7000 off to protect
the PowerSource and the components plugged into it from this condition. If the AUTO SHUT OFF setting
is enabled, the unit will automatically shut down when sensing an abnormal voltage condition.
9. Wiring Reversed LED Indicator: Indicates if the Line and Neutral wires from the wall outlet
to the PowerSource are reversed. Please consult your electrician to correct this immediately.
10. Analog Filter LED Indicator: Indicates the ANALOG FILTER outlet pair has power.
19
4:30 PM Page 20
PRO 7000 FEATURES
NUMBERS REFER TO ILLUSTRATION ON PAGE 18