Battery Installation - AT&T EL52200 Quick Start Manual

Battery installation

Install the battery, as shown below.
1. Plug the battery connector securely into the socket inside the handset battery compartment,
matching the color-coded label. Insert the supplied battery with the label THIS SIDE UP facing
up, as indicated.
2. Align the cover flat against the battery compartment, then slide it upwards until it clicks
into place.
3. Charge the handset by placing it face up in
the telephone base or charger. The CHargE
light is on when charging.
CHargE light
ImPorTanT InformaTIon:
Use only the supplied rechargeable battery or replacement battery (model BT162342/
BT166342). To order, visit our website at
1 (800) 222-3111
www.telephones.att.com
1 (866) 288-4268
. In Canada, dial
To replace the battery, press the tab and slide
the battery compartment cover downwards. Lift
out the old battery and disconnect it from the
handset. Follow the instructions to install and
charge the new battery.
4
or call
.