Making, Answering And Ending Calls - AT&T EL52200 Quick Start Manual

making, answering and ending calls

making a call
PHonE/
Press
number, or predial by first dialing the number and then pressing
PHonE/
fLaSH
before pressing
• Press and hold
pause (a P appears).
• Press /DELETE to make corrections.
mUTE
• Press and hold
The screen shows the elapsed time as you talk (in hours, minutes
and seconds).
answering a call
Press PHonE/
Ending a call
Press off/
CLEar
charger to end the call (known as Auto Off).
Speakerphone
During a call, press
use. Press off/
Temporary ringer silencing
While the telephone is ringing, press
ringer temporarily on that handset only. This turns off the ringer without disconnecting
the call. The next incoming call rings normally at the preset volume.
SPEaKEr and then dial a telephone
or
fLaSH
SPEaKEr. When entering the number
or
PHonE/ or
fLaSH
/PaUSE to insert a three-second dialing
rEDIaL
off/ to return to the idle mode.
CLEar
, SPEaKEr, or any dial pad key (known as Any Key Answer).
fLaSH
or put the handset in the telephone base or
SPEaKEr to switch between speakerphone and normal handset
to hang up
CLEar
SPEaKEr, you can:
.
off/ or mUTE/
CLEar
10
to silence the
DELETE