Advertisement
Quick Links
DESCRIPTION
• Metal construction with various finishes identified by suffix
• 1/2" IPS connections
• Includes metal pop-up waste assembly
OPERATION
• Lever style handles
• Maximum handle(s) rotation angle is 90˚ to full on
• Rotate hot side counterclockwise to open (clockwise to close)
• Rotate cold side clockwise to open (counterclockwise to close)
FLOW
• Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi,
for products made before October 2008 flow is limited to
2.2 gpm max (8.3 L/min)
CARTRIDGE
• 1224 cartridge design
• Nonmetallic and stainless steel material
STANDARDS
• Third party certified to WaterSense,® ASME A112.18.1/CSA B125.1,
ICC A117.1, and all applicable requirements referenced therein
• Certified to ANSI/NSF 61/9
• Contains no more than 0.25% weighted average lead content
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• ADA
for lever handles
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installations
3"
(76mm)
3-7/8"
(98mm)
Rev. 3/11
4"
(102mm)
CRITICAL DIMENSIONS
S p e c i f i c a t i o n s
with Metal Waste Assembly
(Bulk packed 6 per carton)
NOTE: THIS FAUCET IS DESIGNED TO BE
IN STALLED THRU 3 HOLES, 1" MIN. DIA.
5"
(127mm)
3-1/4"
(83mm)
(DO NOT SCALE)
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
BRANTFORD™
4" Lavatory Faucet
Models: 6610 series
Bulk Model: 66610
50/50 Waste Assembly
5-1/4"
(134mm)
2-1/2"
(64 mm)
www.moen.com
3/4"
(20mm)
max.
Advertisement
