Positioning via a CC-Link Network
5.2
CC-Link Communication Settings
5.2.1
Settings on the servo amplifier
In the instructions below we are assuming that you have an operating CC-Link network with the
following specifications:
b Data rate 156Kbit/s
b The master station is a QJ61BT11N module that is integrated in a System Q con-
Procedure:
Set the number of reserved stations:
S1
Fig. 5-3:
Set the station address (max. value 64):
Fig. 5-4:
MR-J3-T
troller platform with a Q02H-CPU.
Correct position of switch S1 for setting the number of reserved stations
Set switches x1 and x10 to the correct station address
CC-Link Communication Settings
1 reserved station
Factory default
setting
2 reserved stations
x1
x10
higher values
lower values
address digits
5 - 33