Icon Order Menu - Mitsubishi Electric WD-57732 Owner's Manual

Dlp high-definition television
Hide thumbs Also See for WD-57732:
Table of Contents

Advertisement

NetCommand Menu, continued
To Replace One Device with Another on an Input Jack
1. Disconnect the device you wish to remove from the
TV.
2. Connect the new device to the vacated jack.
3. Open the Input Name menu from the NetCommand
menu.
4. Select a device name from the list for the input.
5. Open the Review screen and confirm the change.
To Remove the Icon for an HDMI Device
When you disconnect an HDMI device, the icon remains in
the Input Selection menu until you choose to remove it.
1. In the Input Name menu (see figure 4), highlight the
box for the disconnected HDMI input.
2. Press
to select Off.
3. Press MENU to return to the NetCommand menu or
press EXIT to close all menus.

Icon Order Menu

(no NetCommand setup required)
The Icon Order menu allows you to rearrange the device
icons that appear in the Input Selection menu. Change
the sequence to put frequently used icons at the start of
the list. See figures 3 and 5.
To change the icon order
1. Press
to highlight the icon to be moved and
then press ENTER.
2. Press
to drag the icon to the desired posi-
tion. Press ENTER to set the new position.
Figure 5. Icon Order menu
Chapter 5. TV Menu Settings
63

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wd-65732Wd-73732Wd-y57Wd-y65Wd-65732Wd-73732 ... Show all

Table of Contents