Mitsubishi Electric WD-57732 Owner's Manual page 38

38
Chapter 3. TV Setup
Setup Menu, continued
Set Day
Select the day or days that the TV will turn on automati-
to select Daily, Mon-Fri (Monday
cally. Press or
through Friday), or individual days of the week. Press
move to the Time box.
Set Time
With the hour highlighted in yellow characters, press
repeatedly to slowly increment the hour and associated
AM/PM indicator or press and hold to quickly increment
the hour. Press ENTER to highlight the minutes. Press
to set the minutes. Press
Device
Press or to select the device to use when the Timer
turns on the TV. If the TV is already on at the selected
time, the Timer will switch the TV to this device. Press
to move to the Channel box.
Channel
When the selected device is an antenna, you can select a
channel for the TV to tune to when it comes on. Highlight
the Channel box and
press CH
• / or
channels.
• Enter a channel number from the remote control.
You can also enter sub-channel numbers for
digital channels by using the —/CANCEL key.
Note: The POWER/TIMER indicator flashes green when the TV
is off to indicate the TV Timer has been set.
Energy Mode (Setup Menu)
The Energy Mode option lets you select the TV's level of
power consumption while the TV is turned off. Choose
to move to the Device box.
to choose from memorized
either Low Power or Fast Power On. The Low Power
setting uses less energy, but TV power-on takes longer.
The default is Fast Power On. Keep this setting at Fast
Power On if you:
• Expect to use the TV Timer function to turn on the
TV at a preselected time.
• Need the TV Clock to remain accurate for the TV
to
Timer and for scheduling NetCommand-controlled
recordings. With the Low Power setting, you
must reset the TV Clock if the TV is left turned off
for over 48 hours.
• Wish to receive updates to the TV Guide On
Screen program listings.
• Need faster power on.
• Wish to turn off the TV while making a
NetCommand-controlled recording.
• Wish to schedule future NetCommand-controlled
recordings for a time when the TV will be off.
Note: CableCARD™ and TV Guide On Screen® re-
quire the Fast Power On setting. If you insert a
CableCARD™ or activate TV Guide On Screen, the
TV will automatically override a Low Power setting
and change to the Fast Power On setting.
Demo Mode Off (Setup Menu)
If Demo Mode is active, highlight the Demo Mode Off
button and press ENTER.
Software Version (Setup Menu)
For servicing purposes, the TV's software version is dis-
played at the upper right side of the Setup menu.