Appendices; Appendix A: Specifications; Appendix B: Bypassing The Parental Lock - Mitsubishi Electric WD-60735 Owner's Manual

62

Appendices

Appendix A: Specifications

Size, Weight, and Power Consumption
Dimensions (inches)
Weight Power
Model
(lbs.) (watts)
Height Width Depth
WD-60735 36.7 53.8 14.4 68.3 265
WD-65735 39.5 58.2 15.4 75.4 265
WD-73C8,
43.6 65.2 17.5 95 265
WD-73735
WD-65736 39.5 58.2 15.4 75.4 270
WD-73736 43.6 65.2 17.5 95 270
WD-65835 39.5 58.2 15.4 78 270
WD-73835 43.6 65.2 17.5 98 270
Inputs
Type Qty. Input Specifications
Antenna/Cable 2 RF
input F connector, 75-ohm
HDMI (digital CEA-861D standard for digital audio
video/audio) and video via HDMI
HDMI standard connector
WD-73C8
3
Video: 60 Hz: 480i, 480p, 720p, 1080i
24 Hz, 30 Hz, 60 Hz: 1080p
WD-60735
Audio: PCM stereo
WD-65735
HDMI inputs are compliant with
WD-73735
CEA-861D standards for standard,
WD-65736 4
extended, and high-definition video;
WD-73736 digital audio, and HDCP copy protec-
tion.
WD-65835
WD-73835
PC (digital signals only):
VGA (640 x 480, 60 Hz)
W-VGA (848 x 480, 60 Hz)
SVGA (800 x 600, 60 Hz)
W-SVGA (1064 x 600, 60 Hz)
XGA (1024 x 768, 60 Hz)
1280 x 720, 60 Hz
SXGA (1280 x 1024, 60 Hz)
1920 x 1080 (24 Hz, 30 Hz, 60 Hz)
WXGA (1360 x 768, 60 Hz))
Composite up NTSC 480i only
Video to 3 Video: RCA Pin Plug, 1.0 V p-p,
75 ohm
1 dedicated composite video jack; 2
shared with component video Y
S-Video 1 Four-Pin DIN Plug
Y: 1.0 Vp-p 75-ohm
C: 0.286 Vp-p (burst signal), 75-ohm
Component up to 3 CEA-770.1 & CEA 770.2 480i, 480p,
Video (Y/Pr/Pb) sets CEA 770.3 720p and 1080i (TV
analog component video standards)
RCA Pin Plug
Y: 1.0 Vp-p (includes sync),
75-ohm
Pr: 700 mV p-p, 75-ohm
Pb: 700 mV p-p, 75-ohm
1 dedicated set of component video
jacks; 2 sets share a jack with com-
posite video
USB Photo Port 1 For transfer of JPEG files only.
Audio Inputs 5 Analog left and right audio
pairs RCA Pin Plug 500 mV (full scale), 43-k
ohm
Outputs
Description Qty. Output Specifications
Audio Speakers 2 5.75" x 2.4"
Analog Audio 1 RCA Pin Plug, 500 mV rms + 200 mV
(Signal) pair (full scale) for analog sources, 1.5
Vrms + 0.5 Vrms (full scale) for digital
sources.
Digital Audio 1 RCA Pin Plug, Signal Type Dolby
Output Digital, PCM stereo
3-D Glasses 1 VESA 1997-11 Connector and Signal
Emitter Standards for Stereoscopic Display
Hardware
Image Technology Lamp
DLP, 0.65" chip, 1920 x 1080 pixels with Smooth 180-watt VIP type
™
Picture
Channel Over-the-Air: VHF 2–13, UHF 14–69
Frequency Analog Cable: 1–125
Reception Digital Cable: 1–135
Analog NTSC, Digital ATSC with
Over the Air:
sub-channels (all 18 video formats)
Channel
Analog NTSC (non-scrambled)
Type*
Cable: Digital QAM 64 and 256 with sub-
channels (non-scrambled)
* Note for Digital Channels: The channel numbers displayed
on screen are determined by the broadcaster or cable company
and can vary from the standard frequency number. If there is no
channel-number information provided by the broadcaster or cable
company, the TV creates a channel number. The created channel
number uses the frequency number as the main channel number
and the program number as the sub-channel number.
Appendix B: Bypassing the Parental
Lock
IMPORTANT
Cut along the dotted line and file bypass
instructions in a safe place for future
reference.
Appendices
Bypassing the Parental Lock
After you set the lock, you must use your pass code
to view a locked program, view the locked TV, view
a locked channel, cancel the lock, or enter the Lock
menus.
If you forget your pass code, you can view the locked
TV without entering your pass code. When you are
prompted for your pass code, press the number 9 and
QV keys on the TV remote control at the same time. This
process temporarily unlocks the TV.
When entering the Lock menu, this process deletes
your old pass code and prompts you to enter a new
pass code.
• You can either enter a new pass code to open the
Lock menu and make changes or press EXIT to close
the menu.
• If any of the locks are turned on and you exit the
menus when prompted for a new code, the old
code and all lock settings are retained.
• If all locks are turned off and you exit the menus
when prompted for a new code, then the previous
code is erased.
IMPORTANT
When changing or deleting your pass code,
you must use the remote control included
with this TV. You cannot use a Mitsubishi
remote control from another component or a
"universal" remote.
63