Table of Contents
Advertisement
MODELS: VS-45609 / VS-50609 / VS-55609 / VS-60609 / VS-60719 / VS-70709
[Convergence Circuit]
19: Coarse Convergence
Measuring
-----
Instrument
-----
Test Point
Ext. Trigger
------
Measuring
-----
Range
Input Signal
None
Input Terminal
Video Input
Purpose:
To Converge red and blue on green.
Symptom:
Color edging at the top, bottom and sides of the picture.
1. Select an External Input (no signal)
2. Enter the Convergence Mode.
3. Select the Coarse Red Function.
4. Set the Adjustments shown below to converge red on the green.
5. Select the Coarse Blue Function
6. Set the Adjustments shown below to converge blue on the green.
7. Exit the Convergence Mode
Note: If Static Convergence shifts, use HSTA and VSTA to correct convergence at
the center of the screen. (HSTA and VSTA data values must not exceed 200)
CONVERGENCE MODE
Activate ........MENU-0-1-5-9
Misc. ........................."6"
Coarse........................"5"
Fine ..........................."4"
Color (R,G B or DF)...AUDIO
Item No..................VIDEO
Adjust/Move..........ADJUST
Cursor Toggle.........ENTER
Save & Exit.....MENU (twice)
Page 38
Hide quick links:
Advertisement
Table of Contents
