Connected Programming Tools - Mitsubishi FX2N User Manual

FX2N-32DP-IF Profibus-DP Interface Unit
1.3.1

Connected Programming Tools

An FX-20P-E or personal computer can be used to monitor the devices of the 32DP-IF or to
set parameter data for special function blocks connected to the 32DP-IF. For operating instruc-
tions of the FX-20P-E or personal computer, refer to their respective operation manuals. For
device numbers and explanation, refer to chapter 4.
Connecting cable is same as FX
Table 1.2: Connected Programming Tools
Monitoring Tools
FX-20P-E
Personal Computer
(MELSEC MEDOC PLUS)
/FX programmable controller.
0N 2N
"Device Monitor", "Data Change" and "Forced ON/OFF" in the Online
Monitor /Test mode can be used for supported devices.
"Device Edit" and "Entry Data Monitor" can be used for supported
devices.
Description
Introduction 1
1-5