Replacing The Handset Battery Pack - AT&T 1480 User Manual

91-5824-70-00_ATT1480_R0
BATTERIES

Replacing the Handset Battery Pack

1 Remove the battery compartment cover on the handset by
pressing on the indentation and sliding the cover downward.
2 Lift out the old battery pack and disconnect.
3 Align the two holes in the new battery pack's plug with the
socket pins, and snap the plug into place. Place the battery pack in the
compartment with the wires in the lower left corner, along the bottom
of the battery pack.
4 Replace the cover by sliding it up into place.
5 The new battery pack must be charged before using the phone.
Place the handset in the base and allow it to charge for at least
12 hours the first charge. The telephone might operate before that,
but for best performance, let the battery pack charge fully.
28
9/15/03 2:47 PM Page 28