Handset Charger Installation - AT&T 1480 User Manual

2.4 ghz corded cordless telephone with caller id/call waiting
Table of Contents

Advertisement

91-5824-70-00_ATT1480_R0

Handset Charger Installation

1
Connect the power cord. Feed the
power cord through the strain-relief
channel on the bottom of the handset
charger. Then plug the cord into an
electrical outlet not controlled by a
wall switch.
2
Install the handset battery.
Use NiCd Replacement Battery 3301, SKU# 91076 or to increase your
current talk time use the NiMH Replacement Battery 2414, SKU# 23403.
9/15/03
2:47 PM
a)
Remove battery
compartment
cover by pressing
on the
indentation
and sliding
downward.
c) Place battery pack in
compartment with
the wires in the
lower left corner,
along the bottom of
the battery pack.
d) Replace cover by
sliding it up into
place.
Page 7
INSTALLATION
handset is in
b) Align two holes in
plug with socket
pins, and snap the
plug into place.
CHARGING
Light: on
when
charging
stand
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents