Mitsubishi Electric WD-57831 Owner's Manual page 90

90
Chapter 7. Using the TV with a Personal Computer
Connecting a Computer to the TV,
continued
Computer with VGA 15-Pin Monitor Output
(Analog Video)
Required: 15-pin computer VGA-to-DVI-A/VGA-to-DVI-D
cable or a VGA computer cable and a DVI/VGA adapter,
stereo audio cable.
If the computer's audio output is a single mini jack, a mini
audio-to-RCA-male "Y" adapter cable is also required.
IMPORTANT
To use this connection, you must first select the
Analog setting in the PC DVI box of the NetCommand
menu. See the "Setup" section for more.
1. Connect the computer's PC MONITOR OUT to
PC-DVI on the TV back panel. Use either a VGA-
to-DVI monitor cable or a VGA computer cable with a
VGA/DVI adapter.
2. Connect the left (white) and right (red) audio cables
from the computer's analog audio ouput to PC-DVI
AUDIO on the TV back panel.
R
TM
Figure 4. Connecting a computer with a VGA 15-pin monitor
output.