Mitsubishi Electric WD-52631 Owner's Manual
  1. Manuals
  2. Brands
  3. Mitsubishi Electric Manuals
  4. HDTV
  5. WD-52631
  6. Owner's manual

Mitsubishi Electric WD-52631 Owner's Manual

High-definition television
Hide thumbs Also See for WD-52631:
Table of Contents

Advertisement

Quick Links

See also: Service Manual
DLP™ HIGH-DEFINITION TELEVISION
MODELS
WD-52631
WD-57731
WD-65731
OWNER'S GUIDE
• For questions:
-
Call Consumer Relations at 800-332-2119.
-
E-mail us at MDEAservice@mdea.com.
-
Visit our website at www.mitsubishi-tv.
com.
• For information on Demo Mode and System
Reset, please see the back cover.
• To order replacement or additional remote
controls, lamp cartridges, or Owner's Guides,
visit our website at www.mitsuparts.com or
call 800-553-7278.
• Guidelines for setting up and using your new
widescreen TV start on page 13.

Advertisement

Table of Contents
loading

Related Manuals for Mitsubishi Electric WD-52631

Summary of Contents for Mitsubishi Electric WD-52631

  • Page 1 DLP™ HIGH-DEFINITION TELEVISION MODELS WD-52631 WD-57731 WD-65731 OWNER’S GUIDE • For questions: Call Consumer Relations at 800-332-2119. E-mail us at MDEAservice@mdea.com. Visit our website at www.mitsubishi-tv. com. • For information on Demo Mode and System Reset, please see the back cover. • To order replacement or additional remote controls, lamp cartridges, or Owner’s Guides, visit our website at www.mitsuparts.com or call 800-553-7278. • Guidelines for setting up and using your new widescreen TV start on page 13.
  • Page 2 Increase the separation between the equipment and the receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by Mitsubishi could cause harmful interference and would void the user’s authority to operate this equipment. C A U T I O N CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN...

  • Page 3: Our Thanks

    The very core of our corporate philosophy is to provide our customers with the very best. Our development team at Mitsubishi has worked to provide you with a television that defines “state-of-the-art,” with the capability to meet your needs now and in the future.

  • Page 4: Table Of Contents

    Important Information About Your TV General Warnings and Cautions, Notes on Installation and Operation Cleaning Recommendations Important Safeguards ..............Chapter 1: Television Overview Package Contents .
  • Page 5 ..............Mitsubishi DLP™ Projection Television Limited Warranty Index .

  • Page 6: Important Information About Your Tv

    1. Press MENU. 2. When the Main menu appears with Setup highlighted, press ENTER. 3. When the Setup menu opens, press to highlight the on-screen Demo Mode Off button. 4. Press ENTER. TV Model WD-52631 WD-57731 WD-65731 Lamp Replacement Please see Appendix C for details on lamp replacement. Replace the lamp yourself and save the cost of a service call. To Order a Replacement Lamp Under Warranty Call (800) 553-7278. Please have model number, serial...

  • Page 7: Cleaning Recommendations

    • For oily dirt, add a few drops of mild liquid detergent, such as dishwashing detergent, to the water used to moisten the cloth. Rinse with a second cloth moist- ened only with water. Dry with a third dry, soft, non- abrasive cloth. Screen • Follow the instructions for the top and sides, wiping gently in an up and down motion, following the grooves in the screen. • Clean the entire screen evenly, not just sections of the screen. • Do not allow liquid to drip down the grooves of the screen, as some liquid may enter the TV through the gap between the screen and screen frame. • You may purchase Mitsubishi Screen Cleaner, part number CLEANER-VSS, by calling (800) 553-7278. General Cleaning Warnings • DO NOT allow liquid to enter the TV through the venti- lation slots or any crevice. • DO NOT use any strong or abrasive cleaners, as these can scratch the surfaces. • DO NOT use any cleaners containing ammonia, bleach, alcohol, benzene, or thinners, as these can dull the surfaces. • DO NOT spray liquids or cleaners directly on the TV’s surfaces. • DO NOT scrub or rub the TV harshly. Wipe it gently. IMPORTANT DO NOT use any kind of abrasive cleaner on the surface of the TV screen.

  • Page 8: Important Safeguards

    Important Safeguards Please read the following safeguards for your TV and retain for future reference. Always follow all warnings and instruc- tions marked on the television. 1. Read, Retain and Follow All Instructions Read all safety and operating instructions before operating the TV. Retain the safety and operating instructions for future reference. Follow all operating and use instructions. 2. Heed Warnings Adhere to all warnings on the appliance and in the operating instructions. 3. Cleaning Unplug the TV from the wall outlet before cleaning. Do not use liquid, abrasive or aerosol cleaners. Cleaners can permanently damage the cabinet and screen. Use a lightly dampened cloth for cleaning. 4. Attachments and Equipment Never add any attachments and/or equipment without approval of the manufacturer as such additions may result in the risk of fire, electric shock or other personal injury. 5. Water and Moisture Do not use the TV where contact with or immersion in water is possible. Do not use near bath tubs, wash bowls, kitchen sinks, laundry tubs, swimming pools, etc. 6. Accessories Do not place the TV on an unstable cart, stand, tripod, or table. The TV may fall, causing serious injury to a child or adult and serious damage to the TV. Use only with a cart, stand, tripod, bracket or table recommended by the manufacturer, or sold with the TV. Any mounting of the TV should follow the manufacturer’s instructions, and should use mounting accessories recommended by the manufacturer. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

  • Page 9: Replacement Parts

    Important Safeguards, continued 12. Power Lines An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 13. Overloading Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. 14. Object and Liquid Entry Never push objects of any kind into this TV through openings as they may touch dangerous voltage points or short-out parts that could result in fire or electric shock. Never spill liquid of any kind on or into the TV. 15. Outdoor Antenna Grounding If an outside antenna or cable system is connected to the TV, be sure the antenna or cable system is grounded so as to provide some pro- tection against voltage surges and built-up static charges. Article 810 of the National Electric Code, ANSI/NFPA No. 70-2002, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead in wire to an antenna discharge unit, size of grounding conductors, location of antenna dis- charge unit, connection to grounding electrodes, and requirements for the grounding electrode. 16. Servicing Do not attempt to service this TV yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service person- nel. 17. Damage Requiring Service Unplug the TV from the wall outlet and refer servicing to qualified service personnel under the following condi- tions: (a) When the power-supply cord or plug is damaged.
  • Page 11 Television Overview Package Contents Special Features of Your TV Guidelines for Setting Up and Using Your New Widescreen TV TV Front Panel Control Panel ........15 System Reset Button .

  • Page 12: Chapter 1: Television Overview

    Package Contents Please take a moment to review the following list of items to ensure that you have received everything. Special Features of Your TV Your new high-definition widescreen television has many special features that make it the perfect center of your home entertainment system, including: High Definition DLP™ Display System Your widescreen Mitsubishi HDTV uses Texas Instruments most advanced Digital Light Processing™ technology for rear-projection televisions. This TV is truly a high-performance multimedia monitor uniquely capable of both stunning high-definition video images and clear, detailed, high-resolution images from a personal computer. 16:9 Widescreen Picture Format Enjoy a full theatrical experience in the comfort of your home. View pictures as film directors intended them. Digital TV broadcasts, DVDs and newer video game consoles support this widescreen format. Integrated HDTV Tuner Your widescreen Mitsubishi HDTV has an internal HDTV tuner able to receive both over-the-air HDTV broadcasts (received via an antenna) and non-scrambled digital cable broadcasts, including non-scrambled HDTV cable program- ming. High-Definition Video Inputs Two Component Video Inputs, also called Y/Pb/Pr inputs. These inputs receive standard analog video formats of 480i, 480p, 720p, and 1080i high-definition signals. This provides a high level of flexibility when connecting DVD players/recorders, cable boxes, and satellite receivers.

  • Page 13: Guidelines For Setting Up And Using Your New Widescreen Tv

    Digital Cable Ready (CableCARD™), Models WD-57731 and 65731 Your widescreen Mitsubishi HDTV is “Plug-and-Play” digital cable ready. It can descramble a cable provider’s one-way digital signals with the use of a CableCARD security module. The CableCARD is used in place of a traditional cable box to access digital cable programming (including high definition). Contact your local cable provider for availability infor- mation and service details. Guidelines for Setting Up and Using Your New Widescreen TV Getting Started 1. Read the section entitled “Important Information About Your TV” starting on page 5. 2. Choose a location for your TV. • Allow at least four inches of space on all sides of the TV to help prevent overheating. Overheating may cause premature failure of the TV as well as shortened lamp life. • Avoid locations where light may reflect off the screen.

  • Page 14: Changing Channels

    Guidelines for Setting Up and Using Your New Widescreen TV, continued 3. If you have IEEE 1394 A/V devices, see chapter 7, “Using IEEE 1394 Devices,” for details on operating such devices and using the TV to control recording. TV Operation Review chapter 3, “TV Operation,” for TV features including: • Input Selection (viewing source). Select a con- nected program source to watch, such as a VCR, DVD player, or antenna. Press INPUT on the remote control to select from icons for the TV inputs. See “Input Selection Menu.” • Channel Listings. Press GUIDE to view ChannelView™ channel listings. See “ChannelView™...

  • Page 15: Tv Front Panel

    INPUT 3 and controls on front panel of WD-57731 and WD-65731 Above and Below: 1. Shaded buttons are duplicates of keys on the remote control 2. POWER/TIMER indicator—lit during normal operation; flashing when auto-on TV Timer is set 3. LAMP indicator shows lamp condition (usually off during normal TV operation) 4. STATUS indicator (off during normal TV opera- tion) 5. SYSTEM RESET (see description this page) Models WD-57731 and WD-65731 Model WD-52631 Model WD-52631 Lift cover to use the control panel and INPUT 3 front A/V jacks.

  • Page 16: Front-Panel Indicators

    5. You have begun the procedure to update software from an authorized flash memory device. TV is powered off and auto-on timer Green is set. Fast Blinking Additional Information Normal operation. Starts to blink 30 seconds after turning off TV. TV can be turned on before blinking starts or after blinking stops, but not while the indicator is blinking. Normal operation. TV will not operate until lamp access door is secure. See Appen- dix C for installation information. TV will not operate without a lamp. See Appendix C for installation information. Replace the lamp. The TV will not operate when the lamp no longer illuminates. See Appendix C for installation information. Additional Information Normal operation. TV will not operate when the ambient room temperature is too high. Turn off the TV and wait until the room temperature drops. Turn off the TV and unplug the set from the AC power source. Wait one minute and then plug the set back in. If the LED is still on, contact your dealer or a Mitsubishi Authorized Service Center. See www.mitsubishi-tv.com or call 1-800-332-2119 to receive Authorized Service Center information. Additional Information Normal operation. Normal operation. Wait until blinking stops before turning on (approximately 1 minute). Normal operation. For detailed information, see the instructions that accompany the authorized software update. Important: Do not use unauthorized software at any time. Normal operation. TV can be turned on at any time.

  • Page 17: Cablecard™ Technology

    ENTER to access the linked page. 4. To redisplay the CableCARD menu, repeat steps 1 and 5. Press EXIT to return to TV viewing. If there are technical problems with the CableCARD, an error screen automatically displays with information that may be needed by your cable provider when you call them for assistance. Moving Through Other CableCARD Screens In addition to CableCARD menus, other CableCARD application screens may display and require you to make additional selections. When using these screens on your Mitsubishi television: • Blue text denotes a link to another screen. Press ENTER to move to the next application. Screens without blue text contain no links. • You cannot move backward through the links. To exit the CableCARD system, press EXIT. The CANCEL key may not work with some CableCARD screens. All information on these application screens is provided by your local cable company. Contact your cable provider if you have any problems with the application screen displays. IMPORTANT Most CableCARD screens show only status or diagnostic information and do not allow you to make changes.

  • Page 18: Tv Back Panel

    TV Back Panel ANT2 / AUX ANT1 / MAIN ANT 1 and ANT 2 on WD-52631 1. ANT 1/MAIN, ANT 2/AUX (Antenna) If you are connecting an antenna, direct cable without a cable box, or are using cable with a CableCARD™, connect the main antenna or cable source to ANT 1/MAIN. ANT 1/MAIN and ANT 2/AUX can each receive both digital and analog over-the-air channels from a VHF/UHF antenna or non-scrambled digital/analog cable source. ANT 1/MAIN and CableCARD™ (models WD-57731 and WD-65731) Use ANT 1/MAIN to receive premium subscription cable TV service authorized by the CableCARD™ access card.
  • Page 19 TV Back Panel, continued 4. COMPONENT 1 and 2 Inputs (Audio and Video) Y Pb Pr (480i/480p/720p/1080i) Use these jacks to connect devices with component video outputs, such as DVD players, external HDTV receivers, or compatible video game systems. Please see Appendix B for signal compatibility. 5. HDMI™ 1 and 2 Do not connect a computer to either HDMI jack. The HDMI (High Definition Multimedia Interface) supports uncompressed standard and high-definition digital video formats and PCM digital audio format. For PC video, use the PC-DVI input instead. Use these inputs to connect to EIA/CEA-861 compliant devices such as a high-definition receiver or DVD player.
  • Page 21 TV Connections Before You Begin Choosing a Language for Menus ......22 ClearThought® Easy Connect Auto Input Sensing ....22 Digital Video and Home Recording .

  • Page 22: Chapter 2: Tv Connections

    Before You Begin Choosing a Language for Menus When you power on the TV for the first time, you can select either English or Spanish for all menus. You can later change the language through the Setup menu. Figure 1. The Welcome screen lets you change the menu language when you first power on the TV. ClearThought® Easy Connect Auto Input Sensing This TV’s ClearThought® auto input sensing feature allows it to detect most connections automatically. The first time you connect each device you will be prompted to identify it by selecting from a pre-set list of device names. The table below defines how connections on each TV jack are handled.

  • Page 23: Digital Video And Home Recording

    Before You Begin, continued Figure 3. The ClearThought Auto Input Sensing screen for IEEE 1394 devices includes a check box for an associated analog connection. If your IEEE 1394 device has an analog connection to the TV, follow the instructions below. 1. Connect the device to the TV with an IEEE 1394 cable first. 2. When the New 1394 Device screen appears with the Analog Connection check box highlighted, press ENTER to enter a check mark. See figure 3, New 1394 Device screen. Note: It is important to check mark the box when this screen appears upon first connecting the Digital Video and Home Recording...

  • Page 24: Connection Types

    Connection Types Video and Combined Audio/Video Connections These descriptions apply to TV video only and do not cover signals from personal computers. Picture Quality Name (most sources) HDMI Best (carry high- definition video when available) Component Video Good S-Video Fair Composite Video IEEE 1394 Fair to Best (FireWire®) (depending on source; carry all qualities of signals) RF Coaxial Video Note: Only some TV signals are high-definition signals. To view high-definition programming from your cable or satellite provider, you must subscribe to the provider’s high-definition service. Some over-the-air broadcasts are in high-definition and can be received with a high-quality antenna suited to your location. Audio-Only Connections There are two types of audio connections used on this TV. Refer to the table below. Audio Connection Left/Right Analog Stereo Audio...

  • Page 25: Hdtv Cable Box Or Satellite Receiver With Component Video

    HDTV Cable Box or Satellite Receiver with Component Video If your cable box or satellite receiver has HDMI or DVI outputs, use the connections for HDMI or DVI video devices described later in this chapter. Required: RCA component video cables, left/right analog audio cables. A coaxial splitter, available at most electronic supply stores, may be required to complete this installation. 1. Connect the cable from the outside cable or satel- lite service to CABLE IN or SATELLITE IN on the cable box or satellite receiver. See your device’s owner’s guide for instructions and cable compatibility. Figure 4. Connecting an external HDTV receiver with component video connections 2. Connect RCA-type cables from the Y Pb Pr outputs on the HDTV cable box or satellite receiver to COM- PONENT on the TV back panel, matching the colored connections. 3. Connect left (white) and right (red) audio cables from the HDTV cable box or satellite receiver to COMPO- NENT /AUDIO LEFT and AUDIO RIGHT on the TV back panel.

  • Page 26: Wall Outlet Cable (No Cable Box)

    Wall Outlet Cable (no cable box) (can be used with a CableCARD™, models WD-57731 and 65731) It is very important to connect the incoming cable for your primary viewing source to ANT 1/MAIN, especially for CableCARD™ use. 1. Connect the primary incoming coaxial lead cable to ANT 1/MAIN on the TV back panel. 2. For an optional secondary antenna source, connect an antenna (or cable) to ANT 2/AUX. 3. If you have subscribed to a CableCARD™ service, Insert the CableCARD into the CableCARD slot. The top of the card must face in the direction indicated by the CARD TOP arrow. See chapter 1, “Television Overview,” for additional CableCARD information. Figure 6. Wall Outlet Cable...

  • Page 27: Antenna With A Single Lead

    B. For cable or antenna with coaxial lead Connect the coaxial lead directly to ANT 1 on the TV back panel. Figure 7. Connecting a Single Antenna Mitsubishi strongly recommends you avoid using antennas with flat twin leads. Flat twin lead antenna wires are subject to interference which may adversely affect the performance of the TV.

  • Page 28: Vcr To An Antenna Or Wall Outlet Cable

    VCR to an Antenna or Wall Outlet Cable Required: Two-way RF splitter, 3 coaxial cables, right and left analog audio cables, either S-video or video cable. These are not included with the TV but are available at most electronics stores. 1. Connect the incoming cable or antenna to IN on the RF splitter. 2. Connect one coaxial cable from OUT on the RF split- ter to ANTENNA IN on the VCR back panel. 3. Connect one coaxial cable from OUT on the RF split- ter to ANT 1/MAIN on the TV back panel. 4. To use the TV speakers with the VCR, connect left (white) and right (red) audio cables from AUDIO OUT on the VCR to INPUT/AUDIO LEFT and AUDIO RIGHT on the TV back panel. If your VCR is mono (non-stereo), connect only the white (left) cable. Figure 9. Connecting a VCR to an Antenna or Wall Outlet Cable 5. Connect either an S-Video or composite video cable from VIDEO OUT on the VCR back panel to INPUT/VIDEO or S-VIDEO on the TV back panel.

  • Page 29: Vcr To A Cable Box (Audio & Video)

    VCR to a Cable Box (Audio & Video) Required: Two-way RF splitter, 4 coaxial cables, right and left audio cables, S-Video or composite video cable, plus component or S-Video cables and audio cables required to connect the TV to the cable box. 1. Connect the incoming cable to IN on the RF splitter. 2. Connect one coaxial cable from OUT on the RF split- ter to CABLE IN on the cable box. 3. Connect one coaxial cable from OUT on the RF split- ter to ANT 1/MAIN on the TV back panel. 4. Connect one coaxial cable from OUT on the cable box to ANTENNA IN on the VCR back panel. 5. Connect the cable box outputs to the TV as shown in either figure 4 or figure 5, earlier in this chapter. This connection allows the TV to receive the best available signal directly from the cable box. Figure 4: Component video output to the TV’s COMPONENT Y Pb Pr jacks; analog stereo audio to the associated AUDIO jacks. Figure 5: S-Video output to the TV’s INPUT/S-VIDEO jack; analog stereo audio to the associated AUDIO jacks.

  • Page 30: Hdmi Device (Cable Box, Satellite Receiver, Dvd Player, Or Other Device)

    HDMI Device (Cable Box, Satellite Receiver, DVD Player, or Other Device) Required: HDMI-to-HDMI cable. This is not included with the TV. Connect an HDMI cable from the TV back panel to the HDMI device output. HDMI devices provide video and audio through this cable, so no other connection is required. There are two HDMI inputs on the TV back panel. Figure 11. Connecting an HDMI device. Note: HDMI inputs are interoperability with other products certified by Simplay™. IMPORTANT For sound from your devices, note that the HDMI inputs can receive digital stereo audio signals only.

  • Page 31: Dvd Player With Component Video

    DVD Player with Component Video Component video cables and analog audio cables are required. These are not included with the TV. 1. Connect the component video cables from Y PB PR VIDEO OUT on the back of the DVD player to the COMPONENT jacks on the TV back panel, matching the red, green, and blue colored connec- tions. 2. Connect left (white) and right (red) stereo audio cables from AUDIO OUT on the back of the DVD player to COMPONENT/AUDIO LEFT and RIGHT on the TV back panel. Figure 13. Connecting a DVD player with component video IMPORTANT See Appendix B for component video signal compatibility information.

  • Page 32: Older Cable Box

    Older Cable Box Required: 3 coaxial cables, one two-way RF splitter. These are not included with the TV. When this setup is complete, you can use the TV remote control, when programmed, to change channels on the cable box. Note: This connection is not recommended. The other connections described in this chapter provide bet- ter quality audio and video to the TV. 1. Connect the incoming cable to IN on the RF splitter. 2. Connect one coaxial cable from OUT on the RF split- ter to ANT 1/MAIN on the TV back panel. 3. Connect one coaxial cable from OUT on the RF split- ter to IN on the standard cable box. 4. Connect one coaxial cable from OUT on the cable box to ANT 2/AUX on the TV back panel. Figure 15. Connecting an older cable box Camcorder Required: Analog stereo audio cables and either an S-Video or composite video cable. NOTE: For IEEE 1394 camcorders, see also chapter 7, “Using IEEE 1394 Devices.” 1. Connect either an S-Video or composite video cable from VIDEO OUT on the camcorder to INPUT 3/ VIDEO or S-VIDEO on the TV. Connect only one type of video cable; S-Video is recommended, if avail-...
  • Page 33 TV Operation Remote Control ........Choosing a Program Source ChannelView™...

  • Page 34: Chapter 3: Tv Operation

    Remote Control Overview Figure 1, next page 1. Slide Switch: Selects the A/V device to be controlled by the remote control. Set the slide switch to TV for operation of the TV and IEEE 1394 devices. Control of other device types requires programing (see chapter 3, “TV Operation”). 2. SLEEP: Sets the TV to turn off within 2 hours. See the next page for instructions. 3. Digits/Letters: Allow you to tune to a channel by entering channel numbers; press ENTER for faster tuning. Use numbers and the CANCEL key to enter digital sub-channels. Also use for entering information into menus. To select letters when naming channels, repeatedly press the associated number key. The following special characters are available with the 1 and 0 keys: ! & blank space 4. —/CANCEL (SUB-CHANNEL/CANCEL): When entering digital channel numbers, adds a separator between main and sub-channel numbers. Clears FAV and some menu entries. 5. POWER: Turns TV power on and off. 6. QV (QuickView™): Switches between the current channel and the last channel viewed.

  • Page 35: Battery Installation

    Remote Control, continued 26 27 Figure 1. Remote Control Overview Battery Installation Figure 2 1. Remove the remote control’s back cover by gently pressing in the tab and lifting off the cover. 2. Load the batteries, making sure the polarities (+) and (-) are correct. For best results, insert the negative (-) end first. 3. Snap the cover back in place. Sleep Timer Setting the Sleep Timer 1. Press SLEEP on the remote control. 2. Press SLEEP additional times to increase the time in 30-minute increments up to the maximum of 120 minutes. 3. Press EXIT or wait five seconds without pressing any buttons for the message to disappear. 4. Press SLEEP to view the time remaining before the sleep timer turns off the TV.

  • Page 36: Choosing A Program Source

    Choosing a Program Source NOTE: If your only viewing sources are connected to the ANT 1 and ANT 2 antenna jacks, you can switch inputs without the Input Selection menu. Press INPUT to switch between ANT 1 and ANT 2. To verify which is the current source while watching TV, press INFO to see the on-screen status display. Selecting from Multiple Sources: The Input Selection Menu The Input Selection menu allows you to select an input to watch on the TV. The current input appears as a gold- colored icon. 1. Press INPUT on the TV’s remote control to display the Input Selection menu (Figure 2). 2. To select a different input, press remote control to move the highlight through icons in the input section. 3. Press ENTER to switch to the device and close the menu. More About the Input Selection Menu •...

  • Page 37: Status Display

    Status Display The on-screen status display appears when you turn on the TV, change inputs, change channels, or press the INFO button on the remote control. The most common displays Analog Program 1. Source Antenna or Input 2. Analog Channel being received (If an antenna source) 3. Channel Name (if or named in the Channel menu) 4. Signal Type Being Received. Possible: From ANT-1, ANT-2, or INPUT jacks: 480i From COMPONENT jacks: 480i, 480p, 720p, 1080i 5. Screen Format in use Possible: Analog 480i /480p signals: Standard, Expand, Zoom, Stretch, Stretch Plus, Narrow 720p/1080i signals: Standard, Wide Expand 6. Stereo and/or SAP being broadcast. In Split Screen mode, the speaker icon is on the right to indicate the sub-picture is the sound source. 7. V-Chip Ratings Digital Program 1. Digital Major and Sub-Channel Number 2. Digital Channel Name (only if broadcast) 3. Signal Type Being Received Possible: SD 4:3, SD 16:9, HD 4. Screen Format in Use Possible:...

  • Page 38: Tv Signals And Display Formats

    TV Signals and Display Formats This is a widescreen TV, also known as a 16:9 TV. This shape reflects the new types of images available from HDTV and many DVDs. There are still many older style narrow-screen images (called 4:3 aspect ratio) you will encounter. While there is no perfect solution for dis- playing a squarish, narrower image on a wide screen, Mitsubishi offers several display formats from which you can choose. Press FORMAT on the TV remote control to cycle through the available display formats. The last-used format for each device is used when you return to that device. Note: • Only standard format is available for Split Screen. • PC formats vary depending on the PC signal. • For 1080p signals from an HDMI input, see “Com- puter Display Formats” in chapter 6, “Using the TV with a Personal Computer.” DVD Definitions Anamorphic (or Enhanced for WideScreen TV) These DVDs are recorded in a special way to properly show widescreen images on 16:9 TV sets using the Standard format mode. This is the recommended viewing choice. Non-Anamorphic (or 4:3, 1:33:1, Letter Box, or Full...
  • Page 39 Chapter 3. TV Operation TV Display Formats See descriptions on the preceding page.

  • Page 40: Split Screen

    Split Screen Split Screen allows you to view pictures from two different sources at the same time. Split Screen is available when you have video sources connected to the TV in addition to a connection to ANT 1 or ANT 2. Operation Split Screen Operations Turn Split Screen on or off Switch the sound source between main and sub-pictures. Check which picture is the sound source. Change the source of the sub-picture. Change channels (when the input source is ANT 1 or ANT 2). Freeze or unfreeze the sub-picture. Change the size of the main and sub- pictures. Make the sub picture fill the screen. “SPLIT” appears under the Choice of Split Screen Video icon to distinguish sub-Picture Sources this menu from the Input Selection menu.
  • Page 41 Split Screen Displays 16:9 Main Picture/ 16:9 Main Picture/ 4:3 Sub-Picture 16:9 Sub-Picture 16:9 Main 16:9 Main Picture Sub-Picture Picture 16:9 Main 16:9 Main Picture Sub-Picture Picture 16:9 Main 16:9 Main Picture Sub-Picture Picture Display choices. Press the FORMAT key repeatedly while in Split Screen mode to view different displays.
  • Page 43 TV Menu Settings 3D Graphical Main Menu ........Setup Menu .

  • Page 44: Chapter 4: Tv Menu Settings

    3D Graphical Your TV has Mitsubishi’s exclusive 3D Graphical information for menu choices and changes using the TV’s remote control. Menu Screens A picture (icon) is highlighted on the menu screen when selected with the directional arrows . You may then make changes within the menu or access sub- menus, if available. You can also open sub-menus from a button. Sometimes when you select a button, an automatic function begins. The following buttons on the remote control help you navigate within the (Adjust Left/Right Keys) (Adjust Up/Down Keys) Menu System on-screen operating system, which provides on-screen The tures: • The currently selected icon or button is highlighted with a yellow outline; the text color is yellow. • On-screen instructions, shown in the message line at the bottom of the menu, provide feature selection and adjustment information. • Some on-screen menu options must be set before other options are available. Remote Control Buttons system: Function Display or close the Main menu or move back MENU one menu screen at a time.

  • Page 45: Main Menu

    Main Menu Press MENU on the remote control to open the Main menu, figure 1. See below for an overview of the options available through the Main menu. Setup Select English or Spanish for menus and on-screen displays. Memorize the available channels for the antenna or cable service connected to the ANT 1 and ANT 2 jacks. Set the TV’s internal clock either manually or have the TV set the clock automatically. Set the TV Timer to turn on the TV auto- matically at a designated time. • Set the energy mode for power consump- tion when the TV is powered off. • Turn off Demo Mode. View the TV’s software version. Input Name Assign useful names to TV inputs so that you can easily find them in the Input Selection menu. Icon Order Rearrange icons in the Input Selection menu to put frequently used icons first. Channel Edit channels for the ANT 1 and ANT 2 inputs. Manually add or delete channels from memory, name analog channels, or add your favorite channels to a FAV (Favorites) list.

  • Page 46: Setup Menu

    Setup Menu Figure 2. Setup menu Language (Setup Menu) Choose to display the on-screen menus in either English or Spanish (Español). To listen to audio in other languages (when available), see the “Audio Settings” section in this chapter and refer to “SAP” (analog signal) or “Language” (digital signal). Memorize Channels (Setup Menu) For ANT 1/MAIN and ANT 2/AUX The memorization process performs two scans of all possible channels on the selected ANT input. Analog channels are scanned first, then the process is repeated for digital channels. Channel memorization may take up to 15 minutes to complete. To start channel memorization 1. Highlight an input selection based on your connec- tions: Input Condition Ant 1 Air, When connected to an indoor/outdoor Ant 2 Air antenna Ant 1 Cable,...

  • Page 47: Setting The Clock Automatically

    Setup Menu, continued Setting the Clock Automatically Select the Time Zone and the Daylight Savings (DST) options for your state. Press to select Applies or Ignore. You may then tune to a channel on ANT 1 or ANT 2 that uses Extended Data Service (XDS) time data, typically a PBS channel. With Auto selected, the TV auto- matically retrieves the correct time and date information from this channel. Be aware that if a channel displays incorrect time infor- mation, it is because of information sent from the broad- caster and is not a defect of the TV. Note: You may find that some channels send the incor- rect time and the TV clock is reset every time you tune to those channels. To prevent unwanted clock resets, first use the Auto method to set the clock from a channel sending the correct time, then change the method to Manual. Timer (Setup Menu) Figure 4. Timer submenu The Timer feature allows you to set a day and time for the TV to turn on automatically and the device and channel to display when it switches on. If the TV is already on at the requested time, the TV automatically tunes to the channel you designated in the Timer menu.

  • Page 48: Input Name Menu

    Input Name Menu Use the Input Name menu to assign useful labels to the TV inputs that appear in the Input Selection menu. The current viewing device and any unused inputs appear grayed out and unselectable. Use the PC DVI option to specify the type of video signal coming from your computer, either Analog or Digital. For more about this option, see chapter 6, “Using the TV with a Personal Computer.” Detected Inputs that Can Be Renamed Figure 5. Input Name menu To rename an input 1. If you are currently watching the input you wish to rename, change to another input. To do so, press INPUT to open the Input Selection menu, highlight a different input, and press ENTER. 2. With the Input Name menu displayed, press move the highlight to the box for the input you wish to rename. 3. Press to select from the following list. Cable Box Game Camcorder HD Disc...

  • Page 49: Channel Menu

    Channel Menu Settings for the Channel FAV Memory Number Shown Banks Figure 7. Channel menu Antenna (Channel Menu) Select either 1 (ANT 1 MAIN) or 2 (ANT 2 AUX) as the antenna source for the channels you wish to edit. Channel (Channel Menu) Select the affected channel number (shown in the Channel box) in any of three ways: • Press CH / to select from channels already in memory. If you also wish to tune to the channel, press ENTER. • Highlight the channel box and press through all channel numbers, one at a time. If you also wish to tune to the channel, press ENTER. • Highlight the channel box, enter the number directly, and press ENTER. Note that with this method, you must press ENTER for the screen to display settings for the...
  • Page 50 Channel Menu, continued FAV (Channel Menu) The FAV feature lets you store groups of favorite channels in up to nine different FAV memory banks. For example, each household member can store favorite channels in their own bank or you can store groups of channels by content, e.g., news, sports, children’s programming, etc. You can store the same channel in multiple FAV banks. FAV Setup Using the Channel Menu Initial Setup of a FAV Bank and Adding FAV Channels Using the Menu Removing FAV Channels Using the Menu Using FAV Channels Viewing FAV Banks Changing FAV Banks If No FAV Banks Are Set Up...

  • Page 51: Captions Menu

    Captions Menu For analog channels, broadcasters can send either stan- dard closed captions or text service. Standard closed captions follow the dialogue of the characters on screen and display in a small section of the screen. Text-service closed captions often contain information such as weather or news and cover a large portion of the screen. For digital channels, broadcasters can send up to six dif- ferent captioning selections or can send analog captions that are the same as those sent by the analog station. Each TV station may broadcast only one or two types of captions or none at all. The TV cannot decode closed captions received on component or HDMI inputs. Figure 8. Captions menu Analog Captions The TV can display one of the following captions for analog sources: • CC1, CC2, CC3, or CC4: standard closed-caption signals Text1, Text2, Text3, or Text4: Text-service signals • On if mute: Closed captions appear when audio is • muted. When selected, press MUTE on the TV remote control to turn on/off the standard closed-caption signal CC1.
  • Page 52 Black Green Magenta Cyan Blue IMPORTANT Mitsubishi recommends you use contrasting colors for captions and background. Black translucent background combined with a white font makes an easy-to-read combination. Use care when selecting custom colors. Your choice may affect the readability of captions.

  • Page 53: Parental Lock Menu

    Parental Lock Menu The Parental Lock menu gives you control over three dif- ferent types of parental controls. You must use a pass code to open this menu to enable/disable the lock options. The three parental controls available are: • Ratings (U.S. Ratings/Other Ratings) V-Chip technology lets you restrict access to programming based on program-rating signals sent by the broadcaster. For U.S. ratings, you can also set the time of day for these restrictions to be in effect. • Lock by Time Lets you restrict TV use by time of day. • Front Panel Lock Lets you disable the controls on the front of the TV. Use this option if there are small children near the TV who may be tempted to press the buttons. Access to Lock TV by Ratings Menus Time Figure 10. Parental Lock menu Setting a Pass Code You are prompted to enter a pass code whenever you select Parental Lock on the Main menu. To set a pass...
  • Page 54 Parental Lock Menu, continued grams rated TV-PG/PG or lower until you change the rating level. After changing the channel or device, there may be a delay of up to five seconds before the rating restrictions take effect. U.S. Ratings Menu Use this menu to turn U.S. rating restrictions on or off and to change the permitted rating levels. TV Content Categories U.S. Restric- TV Rating and tions On/Off Supplemental Restrictions Figure 11. U.S. Ratings menu 1. Highlight the U.S. Ratings icon Lock menu (figure 10) and press ENTER to open the U.S. Ratings menu (figure 11). 2. Press to select On or Off. 3. If you selected On, press to move to the TV Rating box.

  • Page 55: Bypassing The Ratings Lock And Lock By Time

    Parental Lock Menu, continued Figure 12. The Other Ratings menu is available only if the TV receives broadcast signals carrying an alternate rating system. 1. Highlight the button labelled Other Ratings on the Parental Lock menu (figure 10) and press ENTER to open the Other Ratings menu (figure 12). 2. Press to select On or Off. 3. If you selected On, press to move to the Rating Group box. Note that you can change settings only for the rating system available on the currently tuned channel. In the figure above, for example, the Canadian rating system is in effect. To change settings at a later time for the Canadian rating system, you must again tune to a channel broadcasting the Canadian system.

  • Page 56: V-Chip Signal Information

    V-Chip Signal Information V-Chip ratings let you control the types of programming that can be viewed on the TV. V-Chip ratings are dis- played when you change the channel or press INFO on the remote control. TV Ratings TV ratings apply to TV programs and made-for-TV movies. You can apply supplemental blocking to TV ratings based on the TV content categories described below. TV ratings are: TV-Y Youth. For children under the age of 7. TV-Y7 Youth 7 and older. TV-G General Audience. For the entire family to view. TV-PG Parental Guidance. Parental Guidance is recommended; may not be suitable for some children. TV-14 Adolescent 14 and older. Not recommended for children under the age of 14. TV-MA Mature Audience. For adults only. TV Content Categories Used in association with the TV ratings above, TV content categories allow you to apply supplemental blocking. Apply supplemental blocking using the U.S. Ratings menu. FV Fantasy Violence. Applies to TV-Y7 only. D Sexual Dialog. Applies in different degrees to TV-PG and TV-14. Adult Language. Applies in differing degrees to TV-PG, TV-14, and TV-MA.

  • Page 57: Audio/Video Menu

    Audio/Video Menu Figure 13. Audio/Video Menu A/V Memory Reset A/V Memory Reset allows you to reset a specific input’s A/V settings to the original factory settings. Highlight the box and press to select the input name. Next press ENTER. The audio settings of Balance, Listen to, and Language are general TV settings unaffected by A/V Memory Reset. To reset all A/V settings at once, including the three general settings, perform an A/V Reset by pressing the front-panel buttons GUIDE and FORMAT simultaneously. Settings (Audio and Video) Each input or device has its own A/V memory. Press to select the input or device in the A/V Memory Reset box, then select Audio or Video to adjust individual settings. Press ENTER to close the menu and display the individual settings. Use to cycle through the individual settings. Use to change the setting values. Press EXIT to return to normal TV viewing. For descriptions of the individual A/V settings, see the following pages. Video Mute The default is On, which displays a blue background when no signal is being received on the INPUT, COMPO- NENT, or HDMI jacks.

  • Page 58: Audio Settings

    Audio/Video Menu, continued Audio Settings Analog and Digital Audio Settings Enter the audio adjustment mode using either the Audio/ Video menu or the AUDIO key. Use The adjustable settings display a slider and corresponding numeric value on screen. Values can be adjusted from 0 to 63, with 31 as the midpoint. Note: The effects of the audio settings of Bass, Treble, Balance, and Surround affect only the sound heard through the TV speakers. ◊ Bass Enhances or reduces low-pitched sound. ◊ Treble Enhances or reduces high-pitched sound. ◊ Balance Adjusts the level of sound between the left and right TV speakers. ◊ Surround Creates simulated stereo and surround effects through the TV speakers. Your choices are: Off: No surround effects (default). • • Simulated Stereo: The TV creates a simulated stereo effect when watching a non-stereo program.

  • Page 59: Video Settings

    Audio/Video Menu, continued Video Settings Enter the video adjustment mode using either the Audio/ Video menu or the VIDEO key. Press the VIDEO key repeatedly to cycle through the video options to the one you want to change. Use to change settings. Note: A slider displays on screen for some settings. When the slider is displayed, it represents numeric values, with 63 as the maximum, 31 as the mid- point, and 0 as the minimum. ◊ Picture Mode: Set the Picture Mode first before adjusting other settings, as each Picture Mode stores its own values for Contrast, Brightness, and Color Temperature. Picture Modes allow you to optimize the image for different lighting conditions. The Picture Modes are: • Bright: Suited for most daytime viewing. Natural: Suited for most nighttime viewing. • • Brilliant: The default setting. For use under strong light. ◊ Contrast (Bright/Natural/Brilliant): Provides a slider to adjust the white-to-black level. Low contrast shows a variety of shades in darker images, while high contrast shows darker images more uniformly black and makes colors appear more vibrant. In most home lighting situations, a medium contrast looks best. High con- trast is good for brightly lit environments. ◊...
  • Page 60 Chapter 4. TV Menu Settings...

  • Page 61: Chapter 5: Operating Other Devices With The Remote Control

    Operating Other Devices with the Remote Control Functions Available for Other A/V Devices Programming the Remote Control Programming Codes ......... .

  • Page 62: Functions Available For Other A/V Devices

    • SLEEP • • (FAST FORWARD) • GUIDE (DVR only) (PAUSE) • • MENU (DVR only) • (PLAY) • 0–9 Number Buttons Mitsubishi VCRs are compatible with some additional buttons. Cable Boxes and Satellite Receivers • AUDIO (PAGE UP) • 0–9 Number Buttons (on • CANCEL (on some some models) models) • F1–F4 (A, B, C, D keys on • CH some models) • ENTER (on some models) The record/playback keys • GUIDE (on some models)

  • Page 63: Programming The Remote Control

    Programming the Remote Control Method 1: Code Entry 1. Move the slide switch at the top of the remote to the position for the product you want to control. Refer to the table below. Only one of each device type can be controlled in each slide-switch position. Switch Position Affected Device CABLE/SAT Cable Box DTV Receiver Satellite Receiver Laser Disc Player DVD Player/Recorder DVD Player/Recorder Laser Disc Player AUDIO A/V Receiver Audio Amplifier CD Player* 2. Press and hold POWER on the remote control for several seconds until the button blinks twice and goes off. 3. Release the POWER button. 4. Enter the first five-digit code listed for your equipment. • The POWER button blinks twice when you start to enter the code and then once for each additional keypress. •...

  • Page 64: Programming Codes

    Audio Lock: Universal A/V Receiver Control With Audio Lock active, the remote control operates the volume and mute functions of the A/V receiver in all positions of the slide switch. Activate Audio Lock if you normally use an A/V receiver with your TV and other A/V equipment. 1. Program the AUDIO position for your A/V receiver as described earlier in this section. 2. Move the slide switch to the AUDIO position. 3. Press and hold POWER on the remote control for several seconds until the button blinks twice and goes off. 4. Press keys 9 9 3 ENTER The POWER button will blink twice to indicate Audio Lock is active. To Reset the Remote Control to Operate Volume and Mute for the TV Speakers 1. Press and hold POWER for several seconds until the button blinks twice and goes off.
  • Page 65 31428, 31390 Koss 31497, 31366 Linn 30189 Liquid Video 31497 Magnavox 31514, 31269, 31189, 30531, 30189 Marantz 31289, 31269, 31189, 30200, 30189, McIntosh 31289 Micromega 31189 Mitsubishi 31957, 31922, 31921, 31920, 31393, 30176 Myryad 31189 Nakamichi 31555, 31313, 30097 Onkyo 31320, 31298, 30842, 30135 Optimus 31074, 31023, 30849, 30797, 30670, 30531 Oritron 31497, 31366 Outlaw 31487 Panasonic 31764, 31763, 31633, 31548,...
  • Page 66 30305, 30157, 30038 Marantz 30626, 30435, 30180, 30157, 30038, 30029 Mark Levinson 31484 McIntosh 30660, 30290, 30256 30029 30083 Miro 30000 Mission 30157 Mitsubishi 30098, 30083 30625, 30420 30299, 30019 Nikko 30625, 30174, 30170 30157 Onkyo 31327, 30868, 30102, 30101 Optimus 31075, 31063, 30468, 30437, 30420, 30305, 30179, 30145, 30087, 30037, 30032, 30000 Panasonic 30752, 30388, 30303, 30029...
  • Page 67 Programming Codes, continued Cable Boxes Brand Code Hamlin 10273, 10259, 10034, 10020, 10009 Hitachi 10011 Hytex 10007 i3 Micro 11602 Jasco 10315, 10153, 10015 Jerrold 10810, 10476,10276, 10024, 10015, 10014, 10012, 10011, 10003 Linsay 10440 Magnavox 10027 Memorex 10000 Motorola 11376, 11254, 11187, 11106, 10810, 10476, 10276, 10014 Movie Time 10156, 10063 Multitech 10883 Myrio 11602 Novaplex 10618 10156, 10063 10019, 10007...
  • Page 68 Magnavox 20675, 20646, 20539, 20503 Malata 21159, 20782 Marantz 20539 DVD Players/Recorders Brand Code McIntosh 21533, 21273 Memorex 21270, 20831, 20695 Microsoft 20522 Mintek 20839, 20717 Mitsubishi 21521, 20521 Momitsu 21082 Myryad 20894 20741, 20692, 20591 Nakamichi 21222 20785 Nesa 20717 Next Base 20826 NexxTech 21402 Norcent 21265, 21107, 21003, 20872...
  • Page 69 20203 Carver 20323, 20194, 20064 Denon 20243, 20241, 20172, 20059 Disco Vision 20023 Funai 20203 Harman/Kardon 20194 Hitachi 20023 Kenwood 20258 Magnavox 20243, 20241, 20217, 20194 Marantz 20194, 20064 Mitsubishi 20059 20059 Optimus 20059 Panasonic 20204 Philips 20194,20064 Pioneer 20059, 20023 Polk Audio 20194 Quasar 20204 Realistic 20203 Samsung 20323 Sega...
  • Page 70 21162, 20162, 20035 Media Center PC 21972 20035 Memorex 21262, 21162, 21037, 20479, 20307, 20240, 20209, 20162, 20104, 20048, 20047, 20046, 20039, 20037, 20035, 20000 20240, 20061, 20043 MGN Technology 20240 Microsoft 21972 Mind 21972 Minolta 20105, 20042 Mitsubishi 20443, 20242, 20214, 20173, 20075, 20067, 20061, 20043 Motorola 20048, 20035 20240, 20000 Multitech 20072, 20000 20104, 20067, 20041, 20040, 20038 Nikko 20037 Nikon 20034 Niveus Media 21972 Noblex 20240...
  • Page 71 Programming Codes, continued VCRs and DVRs Brand Code Optimus 21262, 21162, 21062, 21048, 20593, 20432, 20162, 20104, 20048, 20037 Optonica 20062 Orion 20479, 20295, 20209, 20184, 20002 Panasonic 21262, 21162, 21062, 20616, 20225, 20162, 20077, 20035 Penney 20240, 20054, 20042, 20040, 20038, 20037, 20035 Pentax 20105, 20042 Philco 20035 Philips 21181, 21081, 20739, 20618, 20110, 20081, 20062, 20035 Pilot 20037 Pioneer 20067 Polk Audio 20081 Portland 20020 Profitronic 20240 Proscan...
  • Page 73 Using the TV with a Personal Computer Setup ......... . . Video Adjustments Connecting a Computer to the TV Adjusting Image Resolution...

  • Page 74: Chapter 6: Using The Tv With A Personal Computer

    Setup 1. See the TV specifications in Appendix B to confirm that your computer video signal is compatible with the 2. Note whether the computer supplies a digital or analog video signal. You will need this information during the setup procedure. • Digital video signal: Comes from the computer’s DVI or HDMI output. • Analog video signal: Comes from the computer’s VGA 15-pin output and requires a VGA-to-DVI cable or a VGA cable and VGA/DVI adapter. 3. Power on the TV. IMPORTANT In the next step, select the correct video signal type (analog or digital) in the Input Name menu. Otherwise, the TV will be unable to display a picture from the computer.

  • Page 75: Connecting A Computer To The Tv

    Connecting a Computer to the TV Computer with DVI Monitor Output Required: DVI-to-DVI cable, stereo audio cables If the computer’s audio output is a single mini jack, a mini audio-to-RCA-male “Y” adapter cable is also required. 1. Connect the DVI-to-DVI cable from the computer DVI output to the PC-DVI jack on the TV back panel. 2. Connect the left (white) and right (red) audio cables from AUDIO OUT on the PC back panel to PC-DVI AUDIO on the TV back panel. Figure 2. Connecting a personal computer with DVI Monitor Output Computer with HDMI Monitor Output Required: HDMI-to-DVI cable or an HDMI cable with an HDMI/DVI adapter, stereo audio cables If the computer’s audio output is a single mini jack, a mini audio-to-RCA-male “Y” adapter cable is also required.
  • Page 76 Connecting a Computer to the TV, continued Computer with VGA 15-Pin Monitor Output (Analog Video) Required: 15-pin computer VGA-to-DVI/VGA-to-DVI-D cable or a VGA computer cable and a DVI/VGA adapter, stereo audio cable. If the computer’s audio output is a single mini jack, a mini audio-to-RCA-male “Y” adapter cable is also required. IMPORTANT To use this connection, you must first select the Analog setting in the PC DVI box of the Input Name menu.

  • Page 77: Adjusting Image Resolution

    Adjusting Image Resolution Your Mitsubishi TV can display resolutions from standard VGA (640 x 480) through 1920 x 1080 signals at a refresh rate of 60 Hz. Note that 1280 x 1024 and 1920 x 1080 signals are supported only for digital computer signals, and 1920 x 1080 at 24, 30, and 60 Hz. See Appendix B in this book for more on compatible screen resolutions. When connecting a computer providing digital video, in most cases the computer will select the best resolution match to display on the TV. You can override this setting if you wish. For a computer providing analog video, you may need to set the resolution manually. The instruc- tions below are for setting the resolution on most personal computers. 1. In the PC’s Start menu, select Settings. 2. Select Control Panel. 3. Select Display. 4. Choose the Settings tab. 5. Change the resolution to the highest resolution with the aspect ratio best suited for the image. See the table on the next page showing possible PC formats. Depending on your computer’s operating system, adjust the resolution with either: Figure 5. Computer resolution, XGA selection • the Screen area slider. • the Screen Resolution slider 6. To change the refresh rate, click on the Advanced...

  • Page 78: Computer Display Formats

    Computer Display Formats Computer Signal Format 640 X 480 WVGA 848 X 480 SVGA 800 X 600 WSVGA 1064 X 600 Format 1024 X 768 PC 720p 1280 X 720 WXGA 1365 X 768 (DVI-D signals only) Format SXGA 1280 X 1024 (DVI-D signals only) PC 1080p 1920 X 1080 (DVI-D signals only) Repeatedly press the FORMAT key to cycle through the TV displays available for your computer’s video signal. As Displayed on TV Screen 16 X 9 Standard Standard Reduced 4 X 3 Standard...

  • Page 79: Chapter 7: Using Ieee 1394 Devices

    Using IEEE 1394 Devices Overview ......... Recording to IEEE 1394 Recordable Devices The TV Remote Control and IEEE 1394 Devices A/V Discs...

  • Page 80: Chapter 7: Using Ieee 1394 Devices

    Overview Compatible IEEE 1394 Devices Compatible A/V devices include some, but not all, cable boxes, D-VHS VCRs, A/V discs, and future products. Some devices may have IEEE 1394 connectors but are not compatible with the TV. Areas of compatibility to consider are: 1. Digital Video Signals The TV can decode MPEG2 video as provided by cable boxes and some camcorders. Many camcorders provide DV video, which the TV cannot decode. Connect a DV camcorder to the TV using analog audio plus composite video, S-video, or component video, or use HDMI audio/ video. Other types of digital video, such as PC video provided by some computers, must be decoded by the source device and sent to the TV as analog video, S-video, or DVI/HDMI video. 2. Digital Audio Signals When received with video signals, the TV can decode Dolby Digital signals and MPEG audio signals. Other types of digital audio as provided by some digital record- ing devices, such as MP3 audio and DTS audio, cannot be decoded by the TV when received over IEEE 1394 con- nections. The TV may not be able to pass incompatible digital audio signals on the coaxial digital audio output. These signals may pass to other devices, however, on the IEEE 1394 cable. 3. Digital Control Signal The TV can serve as the control center for IEEE 1394 audio/video devices, such as VCRs, A/V Discs, tuners, cable boxes, and amplifiers that are compatible with the...
  • Page 81 Overview, continued Tips for Connecting IEEE 1394 Devices • Do not loop the last device in the chain back to the TV. When the device chain is looped, the TV may not be able to work with the other devices. • Place devices that have only a mechanical (two- position) power switch at the end of the chain or leave the power switch in the on position. When turned off, IEEE 1394 signals may not be able to pass through the device to other devices. • Place devices with the slowest communication speed at the end of the chain. Sometimes the communica- tion speed is marked near the IEEE 1394 connector with an “S” number. The higher the number, the faster the communication speed. This TV has a communica- tion speed of s400. Devices with slow communica- tion speeds can interfere with IEEE 1394 signals from faster devices. When setting up a digital recording between a faster device and a slower device, make the slower device the source and make the faster device the recorder. • Use IEEE 1394 cables 15 feet or less in length between devices. • This TV is an IEEE 1394a device. It can be used with an IEEE 1394b system when an IEEE-1394a-to-1394b convertor is used. 1394b systems are capable of greater distances and multi-room applications.

  • Page 82: Recording To Ieee 1394 Recordable Devices

    Recording to IEEE 1394 Recordable Devices You can use the TV to control recording to IEEE 1394 devices. While recording, you can view a program on a different input or power off the TV. The following table lets you see what signals can be recorded to an IEEE 1394 digital VCR or A/V disc. Recording Signal Type Availability Can be Digital channels, recorded including high-defini- tion channels Digital signals, includ- ing high-definition signals Cannot be Analog channels recorded Analog signals Digital signals Summary of signal inputs and recording to an IEEE 1394 digital VCR or A/V disc. There are two ways to record digital content to an IEEE 1394 recordable A/V disc or DVCR: • From the TV’s Recording Setup menu...
  • Page 83 Recording to IEEE 1394 Recordable Devices, continued Recording from the ChannelView™ Channel Guide ChannelView provides program listings, as sent by the broadcasters, for memorized channels on ANT 1 and ANT 2. Press the GUIDE key while watching ANT 1 or ANT 2 to view ChannelView listings and to set up imme- diate or future recordings as described here. Immediate Recording from ChannelView 1. Press INPUT to open the Input Selection menu. High- light an ANT 1 or ANT 2 program source and press ENTER. 2. Press GUIDE to open the ChannelView channel guide for the current input. 3. Use to highlight the channel and program you wish to record from the list of channels. 4. Press (RECORD).

  • Page 84: The Tv Remote Control And Ieee 1394 Devices

    The TV Remote Control and IEEE 1394 Devices • For satellite receivers and cable boxes, you may also be able to use the numbers or other additional buttons. • For an IEEE 1394 cable box or satellite receiver, you can also try using the CABLE/SAT position of the TV remote control to see if it can operate the device. If not, use the remote control that came with the device. Operation of IEEE 1394 Devices with the TV’s Remote Control (slide switch set to TV position) Device CABLE/SAT Remote Con- trol Key POWER Power the device on/off when highlighted in the Input selection menu. See the instructions above.

  • Page 85: A/V Discs

    A/V Discs A/V Disc Track List Screen When viewing an A/V Disc: • Press GUIDE to display its Track List (see figure below). • Press or to navigate through the Track List. • To play a track, select it on the list, then press ENTER. • Press INFO to view details for a highlighted track. • To move through listings quickly, press PAGE • To delete a track, highlight it and press CANCEL. Figure 4. A/V Disc Track List screen A/V Disc Search by Time While playing an IEEE 1394 A/V disc you can search to a specific time in the recording. 1. Start playing the desired track on the A/V disc. 2. Use the number buttons to enter the time code posi- tion of hours followed by minutes. For example, to enter one hour and twenty-two minutes (1:22) into the track, enter 1, 2, 2.

  • Page 86: Switching Between Analog And Digital Ieee 1394 Outputs

    Switching Between Analog and Digital IEEE 1394 Outputs To enable switching between analog and digital outputs, you must have check marked the Analog Connection box when the New 1394 Device screen displayed when you first connected the device. See the section “Before You Begin” in chapter 2, “TV Connections.” Figure 5. The ClearThought Auto Input sensing screen for IEEE 1394 devices. Place a check in the Analog Connection box if your device has both analog and digital outputs.

  • Page 87: Appendices

    Appendices Appendix A: Bypassing the Parental Lock Appendix B: Specifications Appendix C: Lamp Cartridge Replacement Appendix D: Troubleshooting ..........

  • Page 89: Appendix A: Bypassing The Parental Lock

    • If any of the locks are turned on and you exit the menus when prompted for a new code, the old code and all lock settings are retained. • If all locks are turned off and you exit the menus when prompted for a new code, then the previous code is erased. IMPORTANT When changing or deleting your pass code, you must use the remote control included with this TV. You cannot use a Mitsubishi remote control from another component or a “universal” remote.
  • Page 90 Appendices Appendices This page intentionally left blank...

  • Page 91: Appendix B: Specifications

    Appendix B: Specifications Picture Technology Projection System Lamp Reception Channel Frequency Reception Channel Type* * Note for Digital Channels: The channel numbers displayed on screen are determined by the broadcaster or cable company and can vary from the standard frequency number. If there is no channel-number information provided by the broadcaster or cable company, the TV creates a channel number. The created channel number uses the frequency number as the main channel number and the program number as the sub-channel number. When using an authorized CableCARD, the channel numbers are determined by the cable company. Inputs Description Antenna/Cable input HDMI (digital video/audio) Video/S-Video (one front, two rear) Component Video (Y/Pr/Pb) Audio Inputs PC DVI-I Input DLP, 0.65” chip, 1920 x 1080 pixels with Smooth Picture™ 150-watt VIP type Over-the-Air: VHF 2–13, UHF 14–69 Analog Cable: 1–125 Digital Cable: 1–135 Analog NTSC, Digital ATSC with sub-channels (all 18 video Over the Air: formats)
  • Page 92 Description Video Audio (Signal) Audio (Speakers) Digital Interfaces Digital Audio Output IEEE 1394 (input/output) (2 rear) Physical Characteristics and Power Consumption Model Height WD-52631 33 5/16 WD-57731 36 3/16 WD-65731 40 3/4 IEEE 1394 System Compatibility • This television is designed to conform to IEEE 1394 AV/C Software standards in effect at the time of development. This networking and control technology is designed to provide high-performance digital connections and product control, making the product easier to use. • Mitsubishi D-VHS VCRs are fully compatible with this TV in audio, video, and control. • As other manufacturers distribute products that use the IEEE 1394 AV/C standards, they will be responsible for developing products that meet the standards of the technology, as well as compatibility testing with other products.

  • Page 93: Appendix C: Lamp Cartridge Replacement

    If the television is on, press POWER to turn it off. Unplug the television and allow it to cool for at least one hour before attempting to replace the lamp cartridge. Lamp The light source for this television is a lamp, which is part of a lamp cartridge assembly. The life of the lamp can vary, based on the lamp itself, the air temperature around the TV while it is operating, and your viewing patterns. Warmer air or poor ventilation shorten the lamp life, as does turning the television on and off frequently. Mitsubishi warrants the lamp for one (1) year from the date of original TV purchase at retail. To Order a New Lamp To Receive a Replacement Lamp Under Warranty Call (800) 553-7278. Please have model number, serial number, and TV purchase date available.
  • Page 94 TIGHTENING! 3. Replace the plastic cover and retaining screws. 4. WASH YOUR HANDS THOROUGHLY, AS THIS LAMP CONTAINS MERCURY. Disposal of the Old Lamp Cartridge Lamp under warranty: All lamps replaced under warranty must be returned to Mitsubishi. Use the return shipping label provided and send to Mitsubishi Digital Electronics, America, 1001 Cherry Drive, Suite 2, Braselton, GA 30517. IMPORTANT: Lamps found to be without defect will be returned and charged back to the sender. Lamp no longer under warranty: Contact your...

  • Page 95: Appendix D: Troubleshooting

    Appendix D: Troubleshooting TV Reset Functions You can resolve many common TV problems using the reset functions described in the following table. See also the additional troubleshooting suggestions later in this appendix. IMPORTANT Before you change sound or picture settings: If picture or sound settings seem wrong for a broadcast channel Reset Name When to Use Demo Mode To turn off the retail demo Turn-Off mode slide show. Format When the picture shape seem incorrect, use FORMAT to change the shape of the picture. PerfectColor™ When the color intensities Reset seem out of balance, use (for the single the PerfectColor reset to input currently reset the color balances...
  • Page 96 To reset all consumer- IMPORTANT: accessible settings Use this reset and all memories to the only if all other original factory defaults. resets have been CAUTION: All owner- unsuccessful. performed setups and adjustments will be erased. Service and Support Service If you are unable to correct a problem with your TV, consult your Mitsubishi dealer or Mitsubishi Consumer Relations at (800) 332-2119. • DO NOT adjust any controls other than those described in this Owner’s Guide. • DO NOT remove the protective back cover of your How to Use This information is listed on the cutout page in Appendix A. Please refer to that page. • When Energy Mode is set to Fast Power On, press and hold the MENU button on the front panel for over eight seconds. • When Energy Mode is set to Low Power, press POWER on the front panel to turn on the TV. Press and hold the MENU...
  • Page 97 Appendix D: Troubleshooting, continued General TV Operation Symptom A fan is running even while the TV is powered off. The TV remote control does not work. When I try to use the remote control, the POWER key blinks five times. TV does not respond to the remote control or to front panel control and TV will not power on or off. When a device is selected from the Input Selec- tion menu, the screen is blue (no signal source). Devices are grayed out in the Input Selec- tion menu or the Split Screen Input Selection menu. You have forgotten your Parental Lock pass code. See Appendix A, Bypassing the Parental Lock. Rating restrictions are not working. On-screen displays appear each time you change a function. 10. Cable provider needs information to start CableCARD™ service. TV Channels Symptom The TV takes several seconds to respond to channel changes. You cannot access a channel. Name options are not available for some channels. Only memorized analog channels can be named. When ChannelView™ list is displayed, infor- mation appears incomplete Remarks Normal TV operation. When the TV is off, internal components continue to draw power and must be cooled by the fan.
  • Page 98 Appendix D: Troubleshooting, continued TV Power On/Off Symptom TV takes an excessively long time to power You cannot program the TV to turn on auto- matically (Timer function) The TV will not turn on after being plugged in. If green light on front panel is blinking, wait for at least one minute TV turned itself off and the light on the front panel started to blink. TV will not power off. Picture Symptom Picture does not look like a high-definition picture. Picture has become noticeably dimmer. Split Screen does not display a sub-picture. CableCARD channel is not shown as Split Screen sub-picture when CableCARD channel is the main image. There is a large black or gray rectangle on the screen. You cannot view a picture when playing a VHS tape. VCR or DVD player’s on-screen menus jitter up and down. Remarks • When switched on, the TV needs time to boot up, just as a computer does. The TV’s lamp also requires a few moments to heat up to full brightness. • TV Energy Mode is set to Low Power. To change TV Energy Mode to Fast Power On: Press MENU, open the Setup menu, highlight the Fast Power On radio button. • The TV may be locked.
  • Page 99 Appendix D: Troubleshooting, continued Picture Symptom When viewing a stopped VCR, white lines are rolling on the screen. Screen is black when trying to view digital channels or IEEE 1394 device. 10. DVCR analog/digital problems. Indicators Symptom Lamp indicator light is a constant red. Lamp indicator light is a flashing yellow. Status indicator light is a steady yellow. Status indicator light is a steady/flashing red. Service is required. Contact your dealer or a Mitsubishi Autho- Sound Symptom There is no sound even when the volume is turned up. The sound does not match the screen picture. Remarks • Turn off video mute for the VCR. • Begin playing the tape. • Change the VCR input to the antenna input. The PerfectColor™ color balance has been incorrectly set. Press VIDEO repeatedly until you see the PerfectColor option and press ENTER to open the PerfectColor ™ menu. If the tape is currently playing but no picture displays, there may be a mismatch of the media with the display. Press INPUT to display the Input Selection menu. Press ENTER for the DVCR device. If digital is selected, try analog, or if analog is selected, try digital.
  • Page 100 Appendix D: Troubleshooting, continued IEEE 1394 Recording Symptom Program to be recorded was correctly selected from ChannelView, however, incor- rect program was recorded. Incomplete ChannelView program recorded. ChannelView program recording failed. Cannot record to or from the IEEE 1394 device, including dubbed recordings. IEEE 1394 Devices Symptom Excessive digital artifacts appear when viewing an IEEE 1394 device. D-VHS recordings for digital cable have drop-outs (loss of picture or sound), or no playback. Remarks The broadcaster supplied program information that was incorrect and/or was changed after a recording was added to the Record List. Recording device may lack sufficient blank space to make a full recording. • Connection and compatibility issues with IEEE 1394 (FireWire®) digital devices. This may include too many Firewire devices in use at one time, or the recording device not understanding the record command. • Television lost power long enough to lose current clock time. • TV energy Mode was set to Low Power. Change TV Energy mode to Fast Power On. Press MENU, open the Setup menu, highlight the Fast Power On radio button, press ENTER.
  • Page 101 Appendix D: Troubleshooting, continued IEEE 1394 Devices Symptom There is no audio and video from the IEEE 1394 device. The IEEE 1394 Device is no longer listed in the Input Selection menu. The IEEE 1394 device cannot be selected (is grayed out). MENU button does not display a menu. All IEEE 1394 devices disappear. Cannot rediscover a deleted IEEE 1394 device. An IEEE 1394 device has been plugged in but does not appear in the Input Selection menu (not discovered). 10. Cannot view video from an IEEE 1394 DV camcorder. 11. An IEEE 1394 device is not responding properly. Remarks • The device is not turned on. Turn the device power on. • No media (tape or disc) is inserted into the device. • The media is blank (has no recording). • The play command failed - Try pressing play again on the device’s remote control or front panel. • The device is already in use (for example, the device is cur- rently recording). • The source is copy-protected or violates copy protection.

  • Page 102: Trademark And License Information

    Trademark and License Information LICENSOR’S SUPPLIERS DO NOT MAKE OR PASS ON TO END USER OR ANY OTHER THIRD PARTY, ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY OR REPRESENTATION ON BEHALF OF SUCH SUPPLIERS, INCLUDING, BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, TITLE, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. CableCARD™ is a trademark of Cable Television Laboratories, Inc. CompactFlash® and CF are trademarks of the CompactFlash Association. DCR™ Certification Logo is a trademark of the Consumer Electronics Association. Digital Light Processing™ and DLP™ are trademarks of Texas Instruments. Manufactured under license from Dolby Laboratories. Dolby is a trademark of Dolby Laboratories. DTVLink™ Certification Logo is a trademark of the Consumer Electronics Association. Firewire® is a trademark of Apple Computer, Inc. registered in the U.S. and other countries. HDMI™ the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual prop- erty rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited pay-per-view uses only unless otherwise authorized by Macrovision. Reverse engineering or disas- sembly prohibited. This product includes technology owned by Microsoft Corporation and cannot be used or distributed without a license from Microsoft Licensing, Inc. MultiMediaCard™ is trademark of Infineon Technologies and licensed to the MultiMediaCard Association. The logo and the words “Simplay™” and “Simplay HD™” are the trademarks of Silicon Image, Inc. XBox™ is a trademark of the Microsoft Corporation. ChannelView™, ClearThought®, NetCommand®, PerfectColor™, QuickView™, ViewPoint® are trademarks of Mitsubishi Digital Electronics America, Inc.

  • Page 103: Mitsubishi Tv Software

    Mitsubishi TV Software END-USER LICENSE AGREEMENT FOR EMBEDDED SOFTWARE IMPORTANT – READ CAREFULLY: This License Agreement is a legal agreement between you (either an individual or an entity) and Mitsubishi Digital Electronics America, Inc. (MDEA) for all software pre installed and/or provided along with this television (“Software”). By utilizing this television and Software, you agree to be bound by the terms of this License Agreement. The Software is protected by United States copyright laws and international treaty provisions, as well as other intellectual property laws and treaties. The Software is licensed, not sold. LICENSE GRANT. MDEA grants you a non-exclusive, non-transferable, limited right and license to use one copy of the Software only with the Mitsubishi television model that included this owner’s guide and owned by you. RIGHTS AND LIMITATIONS. Software Not for Resale. You may not resell or otherwise transfer for value the Software, except in conjunction with a sale of the TV that Software has been pre installed. Prohibition on Reverse Engineering, Decompilation and Disassembly. The Software contains trade secrets or other proprietary material in its human perceivable form and to protect them, you may not reverse engineer, decompile, or disassemble, or otherwise reduce the Software to any human perceivable form, except to the extent that the foregoing restriction is expressly prohibited by applicable law. Separation of Components. The Software is licensed as a single product. Its component parts may not be separated for use on more than one TV. No Rental. You may not rent, lease, lend, or sublicense the Software. Trademarks. This License Agreement does not grant you any rights to any trademarks of MDEA. VIOLATIONS. You understand that any use, copying or transfer of the Software, except as permitted pursuant to this License, may subject you to serious criminal and civil penalties including damages and an award to MDEA of attorneys’ fees in connection with any violation of this License. You further understand that you may be held legally responsible for any copyright infringement or other violation of intellectual property rights that is caused, encouraged, or induced by your failure to abide by the terms of the License. This license is effective until terminated, and will terminate immediately without notice from MDEA or judicial resolution if you fail to comply with any provision of this License. COPYRIGHT. All title and intellectual property rights in and to the Software (including but not limited to any images, photographs, animations, video, audio, music, text, and “applets” incorporated into the Software), and any accompanying printed materials are owned...

  • Page 104: Mitsubishi Dlp™ Projection Television Limited Warranty

    Mitsubishi DLP™ Projection Television Limited Warranty MITSUBISHI DIGITAL ELECTRONICS AMERICA, INC. (“MDEA”) warrants as follows to the original purchaser of this television from an authorized MITSUBISHI Audio/Video Dealer, should it prove defective by reason of against defects arising from improper workmanship and/or material: a. Parts. The lenticular (i.e. front picture) screen is warranted against defects in materials and workmanship for a period of thirty (30) days from the date of the original purchase at retail. The lamp and all other parts (except any software incorporated into this television) are warranted for a period of one (1) year from the date of the original purchase at retail. We will repair or replace, at our option, any defective part without charge for the part. Parts used for replacement may be replaced with those of like kind and quality and may be new or remanufactured. Parts used for replacement are war- ranted for the remainder of the original warranty period. b. Embedded Software. MDEA warrants that all software incorporated into this television set (the “Embedded Soft- ware”) will perform in accordance with the functional description of Embedded Software in all material respects, but MDEA does not warrant that the Embedded Software is error-free. MDEA also does not warrant that the Embedded Software will be compatible under IEEE 1394 AV/C and HAVi software standards with products produced by any other manufacturer. The limited warranty contained in this section shall continue for a period of one (1) year from the date of the original purchase at retail. If, after prompt notice within the warranty period, MDEA determines that the Embedded Software has failed to perform in accordance with such functional description in all material respects and if such failure is not due to accident, misuse, modification or misapplication of the Embedded Software, then MDEA shall modify or replace the nonconforming Embedded Software at no charge to you, which at MDEA’s sole discretion may be fulfilled by means of modification or replacement software contained on a replacement memory card for Customer installation. The foregoing shall be MDEA’s sole obligation to you under this limited warranty. All rights under this limited warranty on the Embedded Software also subject to your acceptance of and compliance with the terms of the Software License Agreement applicable to this television, and this limited warranty on the Embedded Software shall be null and void if the Embedded Software is modified or changed in any manner except as specifically authorized by MDEA. c. Labor. For thirty (30) days after the original purchase at retail, we will repair or replace, at our option, the lenticular screen if it proves defective. For certain items that are designed to be replaced by the consumer, including (but not limited to) some Embedded Software, the consumer is solely responsible for any replacement labor. For all other parts, we will provide the labor for a warranty repair by an authorized MITSUBISHI service center without charge for one (1) year from the original date of purchase at retail. d. Notice. To obtain warranty service, you must notify an authorized MITSUBISHI service center of any defect within the applicable warranty time period.
  • Page 105 2. THIS LIMITED WARRANTY DOES NOT COVER: a. Up to .01% pixel outages (small dot picture elements that are dark or incorrectly illuminated). b. Damage to the lenticular screen or Fresnel lens, screen frame, cosmetic damage or to any other damage where such damage is caused by unauthorized modification, alteration, repairs to or service of the product by anyone other than an authorized MITSUBISHI service center; physical abuse to or misuse of the product (including any failure to carry out any maintenance as described in the Owner’s Guide including air filter cleaning or any product damaged by exces- sive physical or electrical stress); any products that have had a serial number or any part thereof altered, defaced or removed; product use in any manner contrary to the Owner’s Guide; freight damage; or any damage caused by acts of God or other factors beyond the reasonable control of MDEA, such as power surge damage caused by electrical system or lightning. This limited warranty also excludes service calls where no defect in the product covered under this warranty is found, service calls related to unsatisfactory audio or visual reception or signal unless caused by a defect in the product that is covered under this limited warranty, all costs, expenses or any other damages arising from product installation, or set-ups, any adjustments of user controls (including contrast, brightness, color, tint, fine tuning, sharp- ness), other adjustment necessary to prepare the unit for display or use, connection with any external audio receiver, antenna, cable or satellite systems, or service of products purchased or serviced outside the U.S.A. Please consult the operating instructions contained in the Owner’s Guide furnished with the product for information regarding user con- trols. 3. ANY EXPRESS WARRANTY NOT PROVIDED HEREIN, AND ANY REMEDY WHICH, BUT FOR THIS PROVISION, MIGHT ARISE BY IMPLICATION OR OPERATION OF LAW, IS HEREBY EXCLUDED AND DISCLAIMED. THE IMPLIED WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR ANY PARTICULAR PURPOSE ARE EXPRESSLY LIMITED TO A TERM OF ONE YEAR. 4. UNDER NO CIRCUMSTANCES SHALL MDEA BE LIABLE TO PURCHASER OR ANY OTHER PERSON FOR ANY INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, WHETHER ARISING OUT OF BREACH OF WARRANTY, BREACH OF CONTRACT, OR OTHERWISE. 5. Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental, special, or consequential damages, so the above limitations or exclusions may not apply to you. 6. This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state. MITSUBISHI DIGITAL ELECTRONICS AMERICA, INC. 9351 Jeronimo Road Irvine, CA 92618-1904...

  • Page 106: Index

    Index A/V Discs 85 A/V Memory Reset. See Reset A/V Receiver Connecting 31 A/V Reset. See Reset Adjust Keys (Up/Down/Left/Right) 34, Anamorphic Picture Format DVD Definnitions 38 Antenna Adjusting and the Signal Strength Meter 49 Connecting 27 Antenna Inputs (ANT 1/MAIN, ANT 2/ AUX) 18 Audio/Video Menu 45, 57 Audio Settings 58 Auto Input Sensing 22 Back Panel (illustrated) 18, 19 Batteries. See Remote Control CableCARD™ 13, 17, 18, 46 Cable Box and the Remote Control 34, 62 Connecting 25, 29, 32 IEEE 1394 80 Camcorder Connecting (Analog) 32 DV (Digital Video) 81, 101 IEEE 1394 Camcorders 81 Power 80 Captions Menu 45, 51 Channels. See also FAV and TV Timer 47 Changing 14...
  • Page 107 Setup 74 Picture Quality and Connection Types 24 and Film Mode 57 Troubleshooting 98 Power Consumption 47, 92 Power On/Off 14, 98 QV (QuickView™) 34 Recording and MONITOR OUT Jacks 19 and Split Screen 19 Cancelling Recordings IEEE 1394 devices 83 Recording Setup Menu and IEEE 1394 Devices 82 RECORD Button 100 Record List and IEEE 1394 Devices 82 Signals Available for Recording Remote Control Batteries 35 Keys and Functions 34 Programming Codes (reference chart) 64 Programming Instructions 63 Reset 35, 64 Reset A/V (all settings) 15 A/V Memory (for individual de- vices) 57 DVCR Counter 84 Pass Code 89 PerfectColor 59 Remote Control 35, 64 Summary Table 95 System Reset Button 15 S-Video Connecting 25 Connector Illustration 24...
  • Page 108 Visit our website at www.mitsuparts.com Demo Mode This TV has a demo mode for use in retail stores. Demo mode causes the TV to display a series of screens outlining the TV’s features. To turn off demo mode: 1. Press MENU. 2. When the Main menu appears with Setup high- lighted, press ENTER. 3. When the Setup menu opens, press to highlight the on-screen Demo Mode Off button. 4. Press ENTER. © 2006 Mitsubishi Digital Electronics America, Inc. 853B542B10v2 Website: www.mitsubishi-tv.com E-mail: MDEAservice@mdea.com 800-332-2119 To order replacement or additional or call 800-553-7278 System Reset If the TV does not respond to the remote control,...

This manual is also suitable for:

Wd-57731Wd-65731Dlp wd-52631Dlp wd-57731Dlp wd-65731

Table of Contents