Download Print this page
Miele HS09 Operating Instructions Manual
Miele HS09 Operating Instructions Manual

Miele HS09 Operating Instructions Manual

Miele operating instructions vacuum cleaner hs09

Advertisement

Quick Links

Operating
Instructions
HS09
UV
M.-Nr. 05 925 521

Advertisement

loading

Summary of Contents for Miele HS09

  • Page 1 Operating Instructions HS09 M.-Nr. 05 925 521...
  • Page 3 Connecting the vacuum cleaner ........
  • Page 4 Do not use on people or on animals. Do not use outdoors or on wet surfaces. Only be vacuumed. Only use the vacuum as described in this manual. Use only Miele recommended accessories. surfaces should...
  • Page 5 Only use genuine Miele double-layer dustbags and filters (see "Maintenance" for instructions on how to insert the dustbag and filters.) If a dustbag has not been inserted, the dust compartment cover will not close.
  • Page 6 Miele vacuum cleaner bags are disposable and are only to be used once. Do not attempt to reuse. A damaged power cord must only be replaced, with a genuine Miele spare part, by an authorized service agent. Do not leave the vacuum plugged in.
  • Page 7 N’utilisez pas l’appareil à l’extérieur ou pour nettoyer des surfaces mouillées. Ne nettoyez que des surfaces Pour utiliser l’aspirateur, suivez uniquement les instructions d’utilisation contenues dans le présent manuel. N’utilisez que les accessoires de Miele recommandés.
  • Page 8 Le fabricant décline toute responsabilité quant à des dommages causés par la non-conformité aux présentes consignes de sécurité. Cet appareil est destiné uniquement à l’usage domestique. N’utilisez pas l’appareil pour contenir ou circonscrire des substances toxiques. Ne laissez pas les enfants jouer avec l’aspirateur.
  • Page 9 Ne les réutilisez pas. Un cordon d’alimentation endommagé doit être remplacé uniquement par une pièce de rechange originale Miele et ce, par un technicien autorisé. Ne laissez pas l’aspirateur branché. Débranchez-le lorsque vous ne l’utilisez pas et avant de procéder à...
  • Page 10 Cet appareil est muni d’un enrouleur. Tenez la fiche lorsque vous rembobinez le cordon d’alimentation et ne la laissez pas fouetter le plancher. Ne procédez pas à des réparations à l’exception de celles précisées dans la section "Entretien". Toute autre réparation devrait être effectuée par un agent de service technique autorisé.
  • Page 11 Genuine Miele dustbags and filters are made from environmentally friendly materials. They can be thrown out with your household trash, provided the vacuum has not been used on restricted materials.
  • Page 13 a Combi nozzle release button b Handpiece c Power cord hook d Telescopic wand e Cord channel f Telescopic wand release button g Body wand h Body wand release i Body wand swivel lever j On / Off button (depending on model with integrated power selection) k Dust compartment lid release l Dust compartment filter (motor protection) m Dustbag change indicator...
  • Page 14 A Insert the body wand into the vacuum cleaner. B Insert the telescopic wand into the body wand and swivel it slightly until it clicks into place. C Press the combi nozzle into the combi nozzle holder. ^ Never carry the vacuum by the combi nozzle.
  • Page 15 ^ Hold the plug and unwind cord to the desired length (max 21’ 4" / 6.5 m): If the vacuum cleaner is operated for more than 30 minutes, at least 14 feet (4.3 m) of the power cord must be unwound to prevent overheating and damage to the vacuum.
  • Page 16 ^ Step onto the body wand swivel release to maneuver it into a comfortable position for vacuum cleaning. One part of the telescopic wand is inserted inside the other and can be adjusted to suit your height for comfortable vacuum cleaning. ^ Press the telescopic wand release button (see arrow) to release the tubes.
  • Page 17 ^ Step onto the On/Off button. The air inlet valve can be opened for a quick reduction of suction e.g. when moving from a carpet to an area rug. ^ Open the air inlet valve just enough for the vacuum to move easily.
  • Page 18 On select models, the suction power can be adjusted between two settings to suit the type of flooring. Min. = reduced suction power Max. = full suction power ^ Step onto the On/Off foot switch. The vacuum is now running at the highest setting.
  • Page 19 Hold onto the vacuum cleaner while using the combi nozzle or telescopic wand to prevent it from falling over. A Pull the sliding release upwards (see arrow). B Pull the combi nozzle hose upwards. ^ The brush end of the combi nozzle can be used for cleaning keyboards, etc.
  • Page 20 "HEPA" exhaust filter as standard. The filter frame is required should it be desired to replace one of these filters with a "SUPER air clean" filter (see "Maintenance"). The accessory holder stores the accessories on the vacuum cleaner.
  • Page 21 To use the crevice nozzle and the upholstery tool, the supplied accessory adapter must be attached to the telescopic wand or to the combi nozzle. For cleaning in folds, crevices or corners. ^ Attach the crevice nozzle onto the accessory adapter. For cleaning upholstery, mattresses, cushions, curtains, covers etc.
  • Page 22 To store the vacuum in an upright position, lock the body wand. The vacuum can also be hung on a hanging hook. Release the body wand and insert the hanging hook into the opening on the handpiece.
  • Page 23 Turn off power at the wall switch and unplug. The Miele filter system consists of three filters which must be replaced regularly to ensure efficient suction: a Dustbag b Dust compartment filter (motor...
  • Page 24 Filter frame - see "Accessories" Use only original Miele dustbags and filters to ensure optimum suction power. Replacement dustbags and filters may be purchased from your local Miele Dealer. Use only Miele dustbags with – the Miele quality emblem – the imprint...
  • Page 25 The dustbag should still be changed. Check the dustbag change indicator regularly. ^ Turn the vacuum cleaner on. ^ Tilt the floor tool from the floor while the body wand is locked. If the red marker fills the indicator window, change the dustbag, even if it is not completely filled.
  • Page 26 ^ Open the dust compartment lid by pressing the release. ^ Grasp the card collar tabs and pull the dustbag out from the dustbag holder. The dustbag has a flap which closes automatically to prevent dust from escaping when the dustbag is removed.
  • Page 27 A dust compartment (motor protection) filter is supplied with every box of Miele dustbags and should be replaced when opening a new box of dustbags. ^ Open the dust compartment lid by pressing the release. ^ Open the filter frame.
  • Page 28 ^ Open the dust compartment lid by pressing the release button. ^ Press the exhaust filter lid release button and open the exhaust filter lid. ^ Remove the filter frame and dispose of the old filter.
  • Page 29 ^ Replace the SUPER air clean filter with the imprint either way out. Close the filter frame. ^ Close the exhaust filter lid and the dust compartment lid until it clicks into place.
  • Page 30 ^ Open the dust compartment lid by pressing the release button. ^ Press the exhaust filter lid release button. ^ Open the exhaust filter lid. ^ Remove the Active air clean or Active HEPA filter. ^ Write the date on the new filter and insert into its compartment ^ Close the exhaust filter lid and the dust compartment lid until it clicks...
  • Page 31 Replace the pads if they appear worn. ^ Use a screwdriver as shown to remove the thread catcher from the slot. ^ Press the new thread catcher into the slot. New thread catcher pads may be purchased from your Miele vacuum dealer.
  • Page 32 Do not leave the vacuum unattended when it is plugged in. Turn off and unplug the vacuum before opening cover. The vacuum cleaner and other plastic components can be cleaned using a damp cloth or a cleaner made especially for plastics.
  • Page 33 The vacuum has overheated and the temperature limiter switched off the vacuum automatically. This may occur if the vacuum wand is blocked, the dustbag is full or fine dust has clogged the pores of the dustbag. A heavily soiled exhaust or dust compartment filter can also cause of overheating.
  • Page 34 In the event of a fault which you cannot correct, please contact the Miele Technical Service Department 1-800-999-1360 techserv@mieleusa.com 1-800-565-6435 service@miele.ca...
  • Page 36 National Headquarters 55G East Beaver Creek Road Richmond Hill, ON L4B 1E5 Phone: 800-643-5381 905-707-1171 Fax: 905-707-0177 www.miele.ca info@miele.ca (general enquiries) professional@miele.ca (commercial enquiries) Mielecare National Service Phone: 800-565-6435 905-850-7456 Fax: 905-850-6651 service@miele.ca (Tech. Service) M.-Nr. 05 925 521 / 00...