Monitor; Quick Reference Chart; Call Alert; Scan - Midland GXT850 Series Owner's Manual

Model GXT800/850 Series
GXT800/850 SERIES QUICK REFERENCE CHART
MENU Channel
Press &
hold Menu
1~22
button
WX Alert
WX Channel
On/Off
1~10

MONITOR

Pressing and holding the MONITOR button for 1 second will let you
hear noise so you can adjust the volume level of the radio when not
receiving a signal. This should be used to check activity on your
current channel before transmitting.
Press and hold the MONITOR button for 1 second again to get out
of MONITOR mode.

SCAN

Your GXT800/850 Series can scan all 22 channels for activity. To
enter, quickly press the SCAN button. Repeat the same procedure to
exit. Your radio will rapidly scan each of the 22 channels and stop on
any active channel. Your radio will resume scanning after 4 seconds
when the channel is no longer active.
When you press the PTT button to transmit on an active channel, the
scanning function will stop and remain on the active channel for 10
seconds before resuming scan when PTT button is no longer pressed.
To resume scanning, quickly press the

CALL ALERT

Your GXT800/850 Series can transmit a call alert for a fixed length of
time. To send a call alert, press the CALL button. The TX icon will
appear while transmitting a call alert and a tone can be heard on the
speaker for confirmation.
The GXT800 has 5 call alert selections while the GXT850 has 10 call
alerts including 5 "animal sound" call alerts - Turkey, Duck, Crow,
Cougar, Wolf.
Page 10
Group Mode On Group Code
Off
0~142
Power
Privacy
Off
H/M/L
CTCSS 1~38
1~104
DCS
ID Setting Ring Tone
Caller ID
4 digit code (0~9),
Press MON to
1~10
choose each digit
Roger Beep
eVOX
Silent Operation
oF~9
On/Off On/Off
button.
/
www.midlandradio.com
®
0~5
Call Tone Vibrate
On/Off
1~5
1~10 for GXT850