Table of Contents
Advertisement
MICROBOARDS TECHNOLOGY, LLC
Introduction
The PF-Pro Disc Printer is a robust automated inkjet CD and DVD printing solution. The PF-Pro Disc Printer
has a 100-disc capacity, making the task of printing large numbers of discs fast, easy and hands-free.
Fully Integrated Automation
Microboards combined their patented auto-loading system with HP's new inkjet printer engine to give users
the highest output possible, both in image resolution and print speed. Since the PF-Pro Disc Printer is an
autoloading printer, no calibration of robotics or manual feeding of discs is required. The PF-Pro Disc Printer
connects by a single USB 2.0 interface to your computer.
Flexibility and Speed for Any Application
While the PF-Pro Disc Printer was designed to fill a need in the high-volume arena, it also has the ability to
print at 4800 x 1200 dpi on both DVD and CD media. The PF-Pro Disc Printer can be used from any
application, although it is recommended that any artwork you create is 12cm by 12cm in size.
What's Included
When unpacking your PF-Pro Disc Printer system, the following items should be included:
•
PF-Pro Disc Printer print system
•
PF-Pro Disc Printer Quick Start Guide
•
Unpack Guide
•
Users Manual (This document)
•
Power Cord
•
USB 2.0 Printer Cable
•
Blank Printable CD's
•
Input Bin rods
•
100 disc output assembly
•
Microboards PF-Pro Disc Printer Install CD
•
1 each: Microboards PFP-HC-CYAN, PFP-HC-MAGENTA, PFP-HC-YELLOW, and PFP-HC-
BLACK Ink cartridges
•
1 each: CG316A (Yellow and Black) and C9382A (Cyan and Magenta) printheads
If any of these items are missing, please contact your distributor or Microboards Technology
Technical Support department at 952-556-1639.
The PF-Pro Disc Printer installation disc includes
an Installer that will walk you through the process
step by step. Please perform the installation in
order as specified in the Installer before
connecting to a computer.
PF-PRO Disc Printer
5
Advertisement
Table of Contents
