Motorola MOTOPURE H12 Quick Start Manual

Before using this product, read the Important Safety and Legal Information pamphlet and follow its instructions.
Take a moment before you get started to familiarize yourself with your new MOTOPURE
H12 Bluetooth® Handsfree Headset. Along with your headset, a charger case and
desktop charger are provided for both charging and storage.
motorola
MOTOPURE H12
Speaker
Quick Start Guide
Power
Switch
Call
Button
Motorola, Inc. 3
PAIR
Consumer Advocacy Office
1307 East Algonquin Road
Your Headset
Schaumburg, IL 60196
Before you can use your headset, you must pair
www.hellomoto.com
(link) it with your phone.
1-877-MOTOBLU
1-888-390-6456 (TTY/TDD United States for Step A - ENSURE HEADSET IS IN PAIRING
hearing impaired)
MODE
Remove headset from charging base or
Guide Number: 6809516A34-A
desktop charger and power on by sliding
Power switch to the On position (towards
Power symbol on headset). The indicator light
first flashes during power up, then initiates
easy pairing. After a few moments, the
indicator light will be steadily lit in blue to
indicate headset is in pairing mode.
Bluetooth QD ID: B013132
MOTOROLA and the Stylized M Logo are registered in the US
Patent & Trademark Office. The use of wireless devices and their
accessories may be prohibited or restricted in certain areas.
Always obey the laws and regulations on the use of these
products. The Bluetooth trademarks are owned by their
proprietor and used by Motorola, Inc. under license. All other
product or service names are the property of their respective
owners.
If the headset does not enter pairing mode,
see TROUBLESHOOTING for help.
© Motorola, Inc. 2007.
BEFORE YOU BEGIN
Charger Charging
Cover Contacts
Charging
Volume Contacts
Buttons (on reverse
side)
Charger
Charger
Port
Port
Charging
Microphone
Indicator
Contacts
Light
START HERE >
Step B - SET YOUR PHONE TO LOOK FOR
YOUR HEADSET
For most Motorola phones:
Menu >
1 On your Motorola phone, press ( )
Settings > Connection > Bluetooth Link >
Handsfree > Look for Devices.
The phone lists Bluetooth devices it finds.
2
Select Motorola H12.
3 Select OK or Yes to pair your headset with
your phone.
4 Enter the passkey: 0000 (for most phones)
5
Select OK.
When your headset successfully pairs and
Indicator Light
connects with your phone, the indicator light
(steadily blue
changes from steadily lit to flashing blue and
for pairing mode)
purple.
Note: These steps are for most Motorola phones.
For other phones, see your phone's user's guide.
1
CHARGE
Your Headset's Battery
Charging with desktop charger
Note: You can only charge the headset via the charging case
or the desktop charger. You cannot plug a Motorola charger
directly into the headset.
1
Remove plastic seal off of ear cushion on
speaker.
2
Plug the Motorola charger into the port on the
charger case or desktop charger.
3 Place headset into charger case or onto
desktop charger as shown. Ensure that
When placing headset in the charger case or
charging contacts on the headset and
desktop charger, the indicator light turns red
charging case or desktop charger connect.
when the battery is charging. It may take up
Charging with charging case to 1 minute for the indicator light to turn on.
Charging
When the headset's battery is fully charged
Contacts
(about 2.5 hours), the indicator light turns
green.
Note: Headset is not functional while charging.
Note: This product uses a lithium ion, rechargeable,
Note: Earhook must be rotated to the orientation non-replaceable battery. Under normal use, the expected life
of the rechargeable battery is approximately 400 charges.
show above to ensure charging contacts connect.
4
TEST AND USE USING YOUR H12
See
Your phone and headset are now paired and
Features and
ready to make and receive calls.
Functions Guide
on the reverse side
To make a call:
for information on
using your H12
1
Place the headset over your ear. See
"Wearing the Headset" on the reverse side
of this guide.
2
On the phone, dial the number you want to
call and press SEND key on your phone.
If your phone and headset are successfully
paired, you will hear ringing on the headset.
After you have successfully paired your
phone and headset, you don't need to
repeat these steps. For daily use, ensure
that your headset is turned ON and that
your phone's Bluetooth feature is ON.
2
START BLUETOOTH
FEATURE
Your Phone
Charging
Your phone's Bluetooth feature is off by default.
Contacts
To use your headset, you must turn on the
Bluetooth feature in your phone.
For most Motorola phones (from home screen):
1 Menu > Settings > Connection >
Press ( )
Bluetooth Link > Setup.
2
Scroll to Power.
3
Select Change.
4
Scroll to On.
5
Press Select to turn on the Bluetooth
feature. The Bluetooth feature remains on
until you turn the feature off.
Note: These steps are for most Motorola phones.
For other phones, see your phone's user's guide.
STORING YOUR
HEADSET
The charging case, desktop stand, and shirt clip
are designed to store your headset. When not
using your headset, use one of the accessories
for storing convenience:
The charging case is designed for portability
and protection. Place the charging case's
cover on the case to protect in a pocket or
bag. Snap the cover underneath and place
in a cup holder for in-vehicle use.
The desktop charger displays your headset
for easy access at home or the office.
The shirt clip secures your headset for
access on-the-go. The clip can be attached
to a shirt, bag, or purse strap.
TROUBLESHOOTING
My headset will not charge.
Make sure your earhook and ear cushions are
properly orientated. See step 1 and "Ear
Cushions and Your Headset" to see proper
orientation.
My headset will not enter pairing mode.
Make sure thay any devices previously paired
with the headset are turned off. If the indicator
light is not steadily lit in blue, turn off both the
other device and headset, wait 10 seconds, then
turn headset back on. Wait for the indicator light
to become steadily lit in blue, indicating the
headset is now in pairing mode.
My phone doesn't find my headset.
Make sure the indicator light on your headset is
on (lit in blue) and steady when your phone is
searching for devices (see step 3).
My headset worked before but now it's not
working.
Make sure your phone is on and the Bluetooth
feature is turned on in your phone (see step 2). If
the Bluetooth feature was turned off or was
turned on only temporarily, you may need to
restart the Bluetooth feature (see step 2) and pair
your phone and headset again (see step 3).
ADDITIONAL SAFETY
INFORMATION
Along with instructions in the Safety and Legal
Information pamphlet, please note the following
additional safety instructions.
Do not store or use headset in temperatures
lower than -10ºC / 14ºF or higher than 50ºC /
122ºF .
Do not recharge headset in temperatures
lower than 0ºC / 32ºF or higher than 40ºC /
104ºF .
Conditions inside a parked car can exceed
this temperature range. Do not store headset
in a parked car.
Do not store headset in direct sunlight.
Storing headset fully charged in high
temperature conditions may permanently
reduce the life of the internal battery.
Battery life may temporarily shorten in
low-temperature conditions.