Performing A Hard Reset; Picture 11 Power Button - Metrologic OptimusPDA SP5700 Series User Manual

4.3.2 Performing a Hard Reset

When a Hard Reset is performed, all formats, preferences, date/time, and other settings are
restored to their factory default values.
To perform a hard reset, press the Reset and Power buttons simultaneously.
Note: Hard reset not only restarts your PDA, but also erases all stored records and entries in
the RAM memory. Therefore, perform a hard reset only in cases when a soft reset mode
does not work.
!
BE CAREFUL
CONSECUTIVELY WITHIN A SHORT PERIOD OF TIME, THIS MAY CAUSE THE SCREEN
TO BECOME BLANK ACCOMPANIED BY VERTICAL LINES.
Copyright © 2007
Metrologic, Inc.
OptimusPDA SP5700 Series User Manual

Picture 11 Power button

WHEN YOU PERFORM A HARD RESET
1 8
Version 2.0
SEVERAL TIMES
29 March 2007