Regulator - GE C2S985 Technical Service Manual

3. Remove the 10 Phillips-head screws and the
heat barrier from the inner door.
4. Remove the inner glass assembly and insulation
from the inner door.
Inner Glass Assembly
Insulation
Heat Barrier
– 46 –

Regulator

To remove the regulator:
1. Remove the range from its installation.
2. Remove the 9/16-in. and 11/16-in. hex-head
nuts holding the gas lines to the regulator.
3. Remove the three 1/4-in. hex-head screws and
the regulator bracket.
9/16-in. Nut
4. Remove the three 1/4-in. hex-head screws from
the regulator bracket.
11/16-in. Nut