Table of Contents
Advertisement
Available languages
Available languages
REPEAT PLAYBACK
1
3
2
1
To repeat a single track, press the
REPEAT button ‚ once; the
REPEAT indicator will blink.
Press the SKIP (
) ƒ or (
button „ to select the specific
track that you wish to repeat.
When the desired track number
appears in the display, press the
PLAY/PAUSE (® ) button … to
begin playback. The specific track
you selected will be repeated
continuously.
PROGRAMMED PLAYBACK
The CD player in this unit has a 30 track programmable memory that allows you to program up to 30 tracks
on any disc for playback in any desired order. You may program 30 different tracks or you may also program
certain tracks to play more than once.
To perform programmed playback, proceed as follows:
1
Press the POWER button to turn
the unit on; the POWER indicator
will light.
PROGRAMMED PLAYBACK CONTINUED ON THE NEXT PAGE
OPERATION (CONTINUED)
2
2
To repeat all of the tracks on a
disc continuously, press the
REPEAT button ‚ twice; the
)
REPEAT indicator will light solid.
Press the Play/Pause (® )
button ƒ to repeat all tracks.
2
Press the CD Door OPEN/CLOSE
area ‚ to open the CD compartment
door. Place a CD on the center
spindle, with the printed label side
facing up. Slide the FUNCTION
control ƒ to the CDG position.
Close the CD compartment door.
10
3
1
Press the Stop (I) button 1 to
stop Repeat playback. To cancel
Repeat Playback, press the
REPEAT button 2 until the
REPEAT indicator goes out. You
can also cancel Repeat Playback
by pressing the Stop (I )
button 1 while in the Stop mode,
the Repeat indicator will turn off.
3
1
2
Press the PROGRAM button; the
PROGRAM indicator and display
will blink.
1
2
Advertisement
Table of Contents
