Onboard Devices Configuration - Asus P5PE-VM Hardware User Manual

2.4.3

Onboard Devices Configuration

Onboard AC'97 Audio
Onboard LAN
Onboard LAN Boot ROM
Serial Port1 Address
Parallel Port Address
Parallel Port Mode
ECP Mode DMA Channel
Parallel Port IRQ
Onboard AC'97 Audio [Auto]
When set to Auto, the BIOS detects whether you are using any audio
device. If an audio device is detected, the onboard audio controller
is enable; if no audio device is detected, the controller is disabled.
Configuration options: [Auto] [Disabled]
OnBoard LAN [Enabled]
Allows you to enable or disable the onboard LAN controller. Configuration
options: [Disabled] [Enabled]
Onboard LAN Boot ROM [Disabled]
Allows you to enable or disable the boot ROM in the onboard LAN
controller. This item appears only when the Onboard LAN item is set
to Enabled. Configuration options: [Disabled] [Enabled]
Serial Port1 Address [3F8/IRQ4]
Allows you to select the Serial Port1 base address. Configuration options:
[Disabled] [3F8/IRQ4][2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]
Parallel Port Address [378]
Allows you to select the Parallel Port base addresses.
Configuration options: [Disabled] [378] [278] [3BC]
Parallel Port Mode [ECP]
Allows you to select the Parallel Port mode.
Configuration options: [Normal] [Bi-directional] [EPP] [ECP]
ECP Mode DMA Channel [DMA3]
Appears only when the Parallel Port Mode is set to [ECP]. This item
allows you to set the Parallel Port ECP DMA.
Configuration options: [DMA0] [DMA1] [DMA3]
Parallel Port IRQ [IRQ7]
Configuration options: [IRQ5] [IRQ7]
2-20
[Auto]
[Enabled]
[Disabled]
[3F8/IRQ4]
[378]
[ECP]
[DMA3]
[IRQ7]
Chapter 2: BIOS setup