Asus Ez Flash 2 Utility - Asus P5KPL-AM SE User Manual

2.1.2

ASUS EZ Flash 2 utility

ASUS EZ Flash 2 allows you to update the BIOS without having to use a bootable floppy disk
and a DOS-based utility.
Download the latest BIOS file for this motherboard from the ASUS website at
www.asus.com.
To update the BIOS using EZ Flash 2.
1. Insert the USB flash disk that contains the BIOS file to a USB port, then launch EZ
Flash 2 in either of these two ways:
(1) Press <Alt> + <F2> during POST to display the following:
FLASH TYPE:
BOARD:
VER:
DATE:
PATH: A:\
A:
Note
[Enter] Select or Load
[Up/Down/Home/End] Move [B] Backup
(2) Enter BIOS setup program. Go to the Tools menu to select EZ Flash 2 and press
<Enter> to enable it.
Press <Tab> to switch between drives until the correct BIOS file is found.
Select the correct BIOS file then press <Enter>, EZ Flash 2 updates the BIOS and
2.
automatically reboots the system when done.
• This function supports USB flash disks with FAT 32/16 format and single partition only.
• DO NOT shut down or reset the system while updating the BIOS to prevent system boot
2-2
ASUSTek EZ Flash 2 BIOS ROM Utility V3.25
MXIC 25L8005
Current ROM
P5KPL-AM SE
0309 (H:00 B:01)
09/28/2008
failure!
Update ROM
BOARD: Unknown
VER: Unknown
DATE: Unknown
[Tab] Switch [V] Drive Info
[ESC] Exit
ASUS P5KPL-AM SE